hadoop/hadoop-mapreduce-project/hadoop-mapreduce-client/hadoop-mapreduce-client-core/src/main/resources/mapred-default.xml

<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
<!--
   Licensed to the Apache Software Foundation (ASF) under one or more
   contributor license agreements.  See the NOTICE file distributed with
   this work for additional information regarding copyright ownership.
   The ASF licenses this file to You under the Apache License, Version 2.0
   (the "License"); you may not use this file except in compliance with
   the License.  You may obtain a copy of the License at

       http://www.apache.org/licenses/LICENSE-2.0

   Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.
-->

<!-- Do not modify this file directly.  Instead, copy entries that you -->
<!-- wish to modify from this file into mapred-site.xml and change them -->
<!-- there.  If mapred-site.xml does not already exist, create it.      -->

<configuration>

<property>
  <name>mapreduce.job.hdfs-servers</name>
  <value>${fs.defaultFS}</value>
</property>

<property>
  <name>mapreduce.job.committer.setup.cleanup.needed</name>
  <value>true</value>
  <description> true, if job needs job-setup and job-cleanup.
                false, otherwise
  </description>
</property>
<!-- i/o properties -->

<property>
  <name>mapreduce.task.io.sort.factor</name>
  <value>10</value>
  <description>The number of streams to merge at once while sorting
  files.  This determines the number of open file handles.</description>
</property>

<property>
  <name>mapreduce.task.io.sort.mb</name>
  <value>100</value>
  <description>The total amount of buffer memory to use while sorting
  files, in megabytes.  By default, gives each merge stream 1MB, which
  should minimize seeks.</description>
</property>

<property>
  <name>mapreduce.map.sort.spill.percent</name>
  <value>0.80</value>
  <description>The soft limit in the serialization buffer. Once reached, a
  thread will begin to spill the contents to disk in the background. Note that
  collection will not block if this threshold is exceeded while a spill is
  already in progress, so spills may be larger than this threshold when it is
  set to less than .5</description>
</property>

<property>
  <name>mapreduce.job.local-fs.single-disk-limit.bytes</name>
  <value>-1</value>
  <description>Enable an in task monitor thread to watch for single disk
    consumption by jobs. By setting this to x nr of bytes, the task will fast
    fail in case it is reached. This is a per disk configuration.</description>
</property>

<property>
  <name>mapreduce.job.local-fs.single-disk-limit.check.interval-ms</name>
  <value>5000</value>
  <description>Interval of disk limit check to run in ms.</description>
</property>

<property>
  <name>mapreduce.job.local-fs.single-disk-limit.check.kill-limit-exceed</name>
  <value>true</value>
  <description>If mapreduce.job.local-fs.single-disk-limit.bytes is triggered
    should the task be killed or logged. If false the intent to kill the task
    is only logged in the container logs.</description>
</property>

<property>
  <name>mapreduce.job.maps</name>
  <value>2</value>
  <description>The default number of map tasks per job.
  Ignored when mapreduce.framework.name is "local".
  </description>
</property>

<property>
  <name>mapreduce.job.reduces</name>
  <value>1</value>
  <description>The default number of reduce tasks per job. Typically set to 99%
  of the cluster's reduce capacity, so that if a node fails the reduces can
  still be executed in a single wave.
  Ignored when mapreduce.framework.name is "local".
  </description>
</property>

<property>
  <name>mapreduce.job.running.map.limit</name>
  <value>0</value>
  <description>The maximum number of simultaneous map tasks per job.
  There is no limit if this value is 0 or negative.
  </description>
</property>

<property>
  <name>mapreduce.job.running.reduce.limit</name>
  <value>0</value>
  <description>The maximum number of simultaneous reduce tasks per job.
  There is no limit if this value is 0 or negative.
  </description>
</property>

<property>
  <name>mapreduce.job.max.map</name>
  <value>-1</value>
  <description>Limit on the number of map tasks allowed per job.
  There is no limit if this value is negative.
  </description>
</property>

  <property>
    <name>mapreduce.job.reducer.preempt.delay.sec</name>
    <value>0</value>
    <description>The threshold (in seconds) after which an unsatisfied
      mapper request triggers reducer preemption when there is no anticipated
      headroom. If set to 0 or a negative value, the reducer is preempted as
      soon as lack of headroom is detected. Default is 0.
    </description>
  </property>

  <property>
    <name>mapreduce.job.reducer.unconditional-preempt.delay.sec</name>
    <value>300</value>
    <description>The threshold (in seconds) after which an unsatisfied
      mapper request triggers a forced reducer preemption irrespective of the
      anticipated headroom. By default, it is set to 5 mins. Setting it to 0
      leads to immediate reducer preemption. Setting to -1 disables this
      preemption altogether.
    </description>
  </property>

  <property>
    <name>mapreduce.job.max.split.locations</name>
    <value>10</value>
    <description>The max number of block locations to store for each split for
    locality calculation.
    </description>
</property>

<property>
  <name>mapreduce.job.split.metainfo.maxsize</name>
  <value>10000000</value>
  <description>The maximum permissible size of the split metainfo file.
  The MapReduce ApplicationMaster won't attempt to read submitted split metainfo
  files bigger than this configured value.
  No limits if set to -1.
  </description>
</property>

<property>
  <name>mapreduce.map.maxattempts</name>
  <value>4</value>
  <description>Expert: The maximum number of attempts per map task.
  In other words, framework will try to execute a map task these many number
  of times before giving up on it.
  </description>
</property>

<property>
  <name>mapreduce.reduce.maxattempts</name>
  <value>4</value>
  <description>Expert: The maximum number of attempts per reduce task.
  In other words, framework will try to execute a reduce task these many number
  of times before giving up on it.
  </description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.fetch.retry.enabled</name>
  <value>${yarn.nodemanager.recovery.enabled}</value>
  <description>Set to enable fetch retry during host restart.</description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.fetch.retry.interval-ms</name>
  <value>1000</value>
  <description>Time of interval that fetcher retry to fetch again when some
  non-fatal failure happens because of some events like NM restart.
  </description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.fetch.retry.timeout-ms</name>
  <value>30000</value>
  <description>Timeout value for fetcher to retry to fetch again when some
  non-fatal failure happens because of some events like NM restart.</description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.retry-delay.max.ms</name>
  <value>60000</value>
  <description>The maximum number of ms the reducer will delay before retrying
  to download map data.
  </description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.parallelcopies</name>
  <value>5</value>
  <description>The default number of parallel transfers run by reduce
  during the copy(shuffle) phase.
  </description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.connect.timeout</name>
  <value>180000</value>
  <description>Expert: The maximum amount of time (in milli seconds) reduce
  task spends in trying to connect to a remote node for getting map output.
  </description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.read.timeout</name>
  <value>180000</value>
  <description>Expert: The maximum amount of time (in milli seconds) reduce
  task waits for map output data to be available for reading after obtaining
  connection.
  </description>
</property>

<property>
  <name>mapreduce.shuffle.listen.queue.size</name>
  <value>128</value>
  <description>The length of the shuffle server listen queue.</description>
</property>

<property>
  <name>mapreduce.shuffle.connection-keep-alive.enable</name>
  <value>false</value>
  <description>set to true to support keep-alive connections.</description>
</property>

<property>
  <name>mapreduce.shuffle.connection-keep-alive.timeout</name>
  <value>5</value>
  <description>The number of seconds a shuffle client attempts to retain
   http connection. Refer "Keep-Alive: timeout=" header in
   Http specification
  </description>
</property>

<property>
  <name>mapreduce.task.timeout</name>
  <value>600000</value>
  <description>The number of milliseconds before a task will be
  terminated if it neither reads an input, writes an output, nor
  updates its status string.  A value of 0 disables the timeout.
  </description>
</property>

<property>
  <name>mapreduce.map.memory.mb</name>
  <value>-1</value>
  <description>The amount of memory to request from the scheduler for each
    map task. If this is not specified or is non-positive, it is inferred from
    mapreduce.map.java.opts and mapreduce.job.heap.memory-mb.ratio.
    If java-opts are also not specified, we set it to 1024.
  </description>
</property>

<property>
  <name>mapreduce.map.cpu.vcores</name>
  <value>1</value>
  <description>The number of virtual cores to request from the scheduler for
  each map task.
  </description>
</property>

<property>
  <name>mapreduce.reduce.memory.mb</name>
  <value>-1</value>
  <description>The amount of memory to request from the scheduler for each
    reduce task. If this is not specified or is non-positive, it is inferred
    from mapreduce.reduce.java.opts and mapreduce.job.heap.memory-mb.ratio.
    If java-opts are also not specified, we set it to 1024.
  </description>
</property>

<property>
  <name>mapreduce.reduce.cpu.vcores</name>
  <value>1</value>
  <description>The number of virtual cores to request from the scheduler for
  each reduce task.
  </description>
</property>

<property>
  <name>mapred.child.java.opts</name>
  <value></value>
  <description>Java opts for the task processes.
  The following symbol, if present, will be interpolated: @taskid@ is replaced
  by current TaskID. Any other occurrences of '@' will go unchanged.
  For example, to enable verbose gc logging to a file named for the taskid in
  /tmp and to set the heap maximum to be a gigabyte, pass a 'value' of:
        -Xmx1024m -verbose:gc -Xloggc:/tmp/@taskid@.gc

  Usage of -Djava.library.path can cause programs to no longer function if
  hadoop native libraries are used. These values should instead be set as part
  of LD_LIBRARY_PATH in the map / reduce JVM env using the mapreduce.map.env and
  mapreduce.reduce.env config settings.

  If -Xmx is not set, it is inferred from mapreduce.{map|reduce}.memory.mb and
  mapreduce.job.heap.memory-mb.ratio.
  </description>
</property>

<!-- This is commented out so that it won't override mapred.child.java.opts.
<property>
  <name>mapreduce.map.java.opts</name>
  <value></value>
  <description>Java opts only for the child processes that are maps. If set,
  this will be used instead of mapred.child.java.opts. If -Xmx is not set,
  it is inferred from mapreduce.map.memory.mb and
  mapreduce.job.heap.memory-mb.ratio.
  </description>
</property>
-->

<!-- This is commented out so that it won't override mapred.child.java.opts.
<property>
  <name>mapreduce.reduce.java.opts</name>
  <value></value>
  <description>Java opts only for the child processes that are reduces. If set,
  this will be used instead of mapred.child.java.opts. If -Xmx is not set,
  it is inferred from mapreduce.reduce.memory.mb and
  mapreduce.job.heap.memory-mb.ratio.
  </description>
</property>
-->

<property>
  <name>mapred.child.env</name>
  <value></value>
  <description>User added environment variables for the task processes.
  Example :
  1) A=foo  This will set the env variable A to foo
  2) B=$B:c This is inherit nodemanager's B env variable on Unix.
  3) B=%B%;c This is inherit nodemanager's B env variable on Windows.
  </description>
</property>

<!-- This is commented out so that it won't override mapred.child.env.
<property>
  <name>mapreduce.map.env</name>
  <value></value>
  <description>User added environment variables for the map task processes.
  </description>
</property>
-->

<!-- This is commented out so that it won't override mapred.child.env.
<property>
  <name>mapreduce.reduce.env</name>
  <value></value>
  <description>User added environment variables for the reduce task processes.
  </description>
</property>
-->

<property>
  <name>mapreduce.admin.user.env</name>
  <value></value>
  <description>
  Expert: Additional execution environment entries for
  map and reduce task processes. This is not an additive property.
  You must preserve the original value if you want your map and
  reduce tasks to have access to native libraries (compression, etc).
  When this value is empty, the command to set execution
  envrionment will be OS dependent:
  For linux, use LD_LIBRARY_PATH=$HADOOP_COMMON_HOME/lib/native.
  For windows, use PATH = %PATH%;%HADOOP_COMMON_HOME%\\bin.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.log.level</name>
  <value>INFO</value>
  <description>The logging level for the MR ApplicationMaster. The allowed
  levels are: OFF, FATAL, ERROR, WARN, INFO, DEBUG, TRACE and ALL.
  The setting here could be overriden if "mapreduce.job.log4j-properties-file"
  is set.
  </description>
</property>

<property>
  <name>mapreduce.map.log.level</name>
  <value>INFO</value>
  <description>The logging level for the map task. The allowed levels are:
  OFF, FATAL, ERROR, WARN, INFO, DEBUG, TRACE and ALL.
  The setting here could be overridden if "mapreduce.job.log4j-properties-file"
  is set.
  </description>
</property>

<property>
  <name>mapreduce.reduce.log.level</name>
  <value>INFO</value>
  <description>The logging level for the reduce task. The allowed levels are:
  OFF, FATAL, ERROR, WARN, INFO, DEBUG, TRACE and ALL.
  The setting here could be overridden if "mapreduce.job.log4j-properties-file"
  is set.
  </description>
</property>

<property>
  <name>mapreduce.map.cpu.vcores</name>
  <value>1</value>
  <description>
      The number of virtual cores required for each map task.
  </description>
</property>

<property>
  <name>mapreduce.reduce.cpu.vcores</name>
  <value>1</value>
  <description>
      The number of virtual cores required for each reduce task.
  </description>
</property>

<property>
  <name>mapreduce.reduce.merge.inmem.threshold</name>
  <value>1000</value>
  <description>The threshold, in terms of the number of files
  for the in-memory merge process. When we accumulate threshold number of files
  we initiate the in-memory merge and spill to disk. A value of 0 or less than
  0 indicates we want to DON'T have any threshold and instead depend only on
  the ramfs's memory consumption to trigger the merge.
  </description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.merge.percent</name>
  <value>0.66</value>
  <description>The usage threshold at which an in-memory merge will be
  initiated, expressed as a percentage of the total memory allocated to
  storing in-memory map outputs, as defined by
  mapreduce.reduce.shuffle.input.buffer.percent.
  </description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.input.buffer.percent</name>
  <value>0.70</value>
  <description>The percentage of memory to be allocated from the maximum heap
  size to storing map outputs during the shuffle.
  </description>
</property>

<property>
  <name>mapreduce.reduce.input.buffer.percent</name>
  <value>0.0</value>
  <description>The percentage of memory- relative to the maximum heap size- to
  retain map outputs during the reduce. When the shuffle is concluded, any
  remaining map outputs in memory must consume less than this threshold before
  the reduce can begin.
  </description>
</property>

<property>
  <name>mapreduce.reduce.shuffle.memory.limit.percent</name>
  <value>0.25</value>
  <description>Expert: Maximum percentage of the in-memory limit that a
  single shuffle can consume. Range of valid values is [0.0, 1.0]. If the value
  is 0.0 map outputs are shuffled directly to disk.</description>
</property>

<property>
  <name>mapreduce.shuffle.ssl.enabled</name>
  <value>false</value>
  <description>
    Whether to use SSL for for the Shuffle HTTP endpoints.
  </description>
</property>

<property>
  <name>mapreduce.shuffle.ssl.file.buffer.size</name>
  <value>65536</value>
  <description>Buffer size for reading spills from file when using SSL.
  </description>
</property>

<property>
  <name>mapreduce.shuffle.max.connections</name>
  <value>0</value>
  <description>Max allowed connections for the shuffle.  Set to 0 (zero)
               to indicate no limit on the number of connections.
  </description>
</property>

<property>
  <name>mapreduce.shuffle.max.threads</name>
  <value>0</value>
  <description>Max allowed threads for serving shuffle connections. Set to zero
  to indicate the default of 2 times the number of available
  processors (as reported by Runtime.availableProcessors()). Netty is used to
  serve requests, so a thread is not needed for each connection.
  </description>
</property>

<property>
  <name>mapreduce.shuffle.transferTo.allowed</name>
  <value></value>
  <description>This option can enable/disable using nio transferTo method in
  the shuffle phase. NIO transferTo does not perform well on windows in the
  shuffle phase. Thus, with this configuration property it is possible to
  disable it, in which case custom transfer method will be used. Recommended
  value is false when running Hadoop on Windows. For Linux, it is recommended
  to set it to true. If nothing is set then the default value is false for
  Windows, and true for Linux.
  </description>
</property>

<property>
  <name>mapreduce.shuffle.transfer.buffer.size</name>
  <value>131072</value>
  <description>This property is used only if
  mapreduce.shuffle.transferTo.allowed is set to false. In that case,
  this property defines the size of the buffer used in the buffer copy code
  for the shuffle phase. The size of this buffer determines the size of the IO
  requests.
  </description>
</property>

<property>
  <name>mapreduce.reduce.markreset.buffer.percent</name>
  <value>0.0</value>
  <description>The percentage of memory -relative to the maximum heap size- to
  be used for caching values when using the mark-reset functionality.
  </description>
</property>

<property>
  <name>mapreduce.map.speculative</name>
  <value>true</value>
  <description>If true, then multiple instances of some map tasks
               may be executed in parallel.</description>
</property>

<property>
  <name>mapreduce.reduce.speculative</name>
  <value>true</value>
  <description>If true, then multiple instances of some reduce tasks
               may be executed in parallel.</description>
</property>

<property>
  <name>mapreduce.job.speculative.speculative-cap-running-tasks</name>
  <value>0.1</value>
  <description>The max percent (0-1) of running tasks that
  can be speculatively re-executed at any time.</description>
</property>

<property>
  <name>mapreduce.job.speculative.speculative-cap-total-tasks</name>
  <value>0.01</value>
  <description>The max percent (0-1) of all tasks that
  can be speculatively re-executed at any time.</description>
</property>

<property>
  <name>mapreduce.job.speculative.minimum-allowed-tasks</name>
  <value>10</value>
  <description>The minimum allowed tasks that
  can be speculatively re-executed at any time.</description>
</property>

<property>
  <name>mapreduce.job.speculative.retry-after-no-speculate</name>
  <value>1000</value>
  <description>The waiting time(ms) to do next round of speculation
  if there is no task speculated in this round.</description>
</property>

<property>
  <name>mapreduce.job.speculative.retry-after-speculate</name>
  <value>15000</value>
  <description>The waiting time(ms) to do next round of speculation
  if there are tasks speculated in this round.</description>
</property>

<property>
  <name>mapreduce.job.map.output.collector.class</name>
  <value>org.apache.hadoop.mapred.MapTask$MapOutputBuffer</value>
  <description>
    The MapOutputCollector implementation(s) to use. This may be a comma-separated
    list of class names, in which case the map task will try to initialize each
    of the collectors in turn. The first to successfully initialize will be used.
  </description>
</property>

<property>
  <name>mapreduce.job.speculative.slowtaskthreshold</name>
  <value>1.0</value>
  <description>The number of standard deviations by which a task's
  ave progress-rates must be lower than the average of all running tasks'
  for the task to be considered too slow.
  </description>
</property>

<property>
  <name>mapreduce.job.ubertask.enable</name>
  <value>false</value>
  <description>Whether to enable the small-jobs "ubertask" optimization,
  which runs "sufficiently small" jobs sequentially within a single JVM.
  "Small" is defined by the following maxmaps, maxreduces, and maxbytes
  settings. Note that configurations for application masters also affect
  the "Small" definition - yarn.app.mapreduce.am.resource.mb must be
  larger than both mapreduce.map.memory.mb and mapreduce.reduce.memory.mb,
  and yarn.app.mapreduce.am.resource.cpu-vcores must be larger than
  both mapreduce.map.cpu.vcores and mapreduce.reduce.cpu.vcores to enable
  ubertask. Users may override this value.
  </description>
</property>

<property>
  <name>mapreduce.job.ubertask.maxmaps</name>
  <value>9</value>
  <description>Threshold for number of maps, beyond which job is considered
  too big for the ubertasking optimization.  Users may override this value,
  but only downward.
  </description>
</property>

<property>
  <name>mapreduce.job.ubertask.maxreduces</name>
  <value>1</value>
  <description>Threshold for number of reduces, beyond which job is considered
  too big for the ubertasking optimization.  CURRENTLY THE CODE CANNOT SUPPORT
  MORE THAN ONE REDUCE and will ignore larger values.  (Zero is a valid max,
  however.)  Users may override this value, but only downward.
  </description>
</property>

<property>
  <name>mapreduce.job.ubertask.maxbytes</name>
  <value></value>
  <description>Threshold for number of input bytes, beyond which job is
  considered too big for the ubertasking optimization.  If no value is
  specified, dfs.block.size is used as a default.  Be sure to specify a
  default value in mapred-site.xml if the underlying filesystem is not HDFS.
  Users may override this value, but only downward.
  </description>
</property>

<property>
    <name>mapreduce.job.emit-timeline-data</name>
    <value>false</value>
    <description>Specifies if the Application Master should emit timeline data
    to the timeline server. Individual jobs can override this value.
    </description>
</property>

<property>
  <name>mapreduce.job.sharedcache.mode</name>
  <value>disabled</value>
  <description>
    A comma delimited list of resource categories to submit to the shared cache.
    The valid categories are: jobjar, libjars, files, archives.
    If "disabled" is specified then the job submission code will not use
    the shared cache.
  </description>
</property>

<property>
  <name>mapreduce.input.fileinputformat.split.minsize</name>
  <value>0</value>
  <description>The minimum size chunk that map input should be split
  into.  Note that some file formats may have minimum split sizes that
  take priority over this setting.</description>
</property>

<property>
  <name>mapreduce.input.fileinputformat.list-status.num-threads</name>
  <value>1</value>
  <description>The number of threads to use to list and fetch block locations
  for the specified input paths. Note: multiple threads should not be used
  if a custom non thread-safe path filter is used.
  </description>
</property>

<property>
  <name>mapreduce.input.lineinputformat.linespermap</name>
  <value>1</value>
  <description>When using NLineInputFormat, the number of lines of input data
  to include in each split.</description>
</property>


<property>
  <name>mapreduce.client.submit.file.replication</name>
  <value>10</value>
  <description>The replication level for submitted job files.  This
  should be around the square root of the number of nodes.
  </description>
</property>

<property>
  <name>mapreduce.task.files.preserve.failedtasks</name>
  <value>false</value>
  <description>Should the files for failed tasks be kept. This should only be
               used on jobs that are failing, because the storage is never
               reclaimed. It also prevents the map outputs from being erased
               from the reduce directory as they are consumed.</description>
</property>


<!--
  <property>
  <name>mapreduce.task.files.preserve.filepattern</name>
  <value>.*_m_123456_0</value>
  <description>Keep all files from tasks whose task names match the given
               regular expression. Defaults to none.</description>
  </property>
-->

<property>
  <name>mapreduce.output.fileoutputformat.compress</name>
  <value>false</value>
  <description>Should the job outputs be compressed?
  </description>
</property>

<property>
  <name>mapreduce.output.fileoutputformat.compress.type</name>
  <value>RECORD</value>
  <description>If the job outputs are to compressed as SequenceFiles, how should
               they be compressed? Should be one of NONE, RECORD or BLOCK.
  </description>
</property>

<property>
  <name>mapreduce.output.fileoutputformat.compress.codec</name>
  <value>org.apache.hadoop.io.compress.DefaultCodec</value>
  <description>If the job outputs are compressed, how should they be compressed?
  </description>
</property>

<property>
  <name>mapreduce.map.output.compress</name>
  <value>false</value>
  <description>Should the outputs of the maps be compressed before being
               sent across the network. Uses SequenceFile compression.
  </description>
</property>

<property>
  <name>mapreduce.map.output.compress.codec</name>
  <value>org.apache.hadoop.io.compress.DefaultCodec</value>
  <description>If the map outputs are compressed, how should they be
               compressed?
  </description>
</property>

<property>
  <name>map.sort.class</name>
  <value>org.apache.hadoop.util.QuickSort</value>
  <description>The default sort class for sorting keys.
  </description>
</property>

<property>
  <name>mapreduce.task.userlog.limit.kb</name>
  <value>0</value>
  <description>The maximum size of user-logs of each task in KB. 0 disables the cap.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.container.log.limit.kb</name>
  <value>0</value>
  <description>The maximum size of the MRAppMaster attempt container logs in KB.
    0 disables the cap.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.task.container.log.backups</name>
  <value>0</value>
  <description>Number of backup files for task logs when using
    ContainerRollingLogAppender (CRLA). See
    org.apache.log4j.RollingFileAppender.maxBackupIndex. By default,
    ContainerLogAppender (CLA) is used, and container logs are not rolled. CRLA
    is enabled for tasks when both mapreduce.task.userlog.limit.kb and
    yarn.app.mapreduce.task.container.log.backups are greater than zero.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.container.log.backups</name>
  <value>0</value>
  <description>Number of backup files for the ApplicationMaster logs when using
    ContainerRollingLogAppender (CRLA). See
    org.apache.log4j.RollingFileAppender.maxBackupIndex. By default,
    ContainerLogAppender (CLA) is used, and container logs are not rolled. CRLA
    is enabled for the ApplicationMaster when both
    yarn.app.mapreduce.am.container.log.limit.kb and
    yarn.app.mapreduce.am.container.log.backups are greater than zero.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.shuffle.log.separate</name>
  <value>true</value>
  <description>If enabled ('true') logging generated by the client-side shuffle
    classes in a reducer will be written in a dedicated log file
    'syslog.shuffle' instead of 'syslog'.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.shuffle.log.limit.kb</name>
  <value>0</value>
  <description>Maximum size of the syslog.shuffle file in kilobytes
    (0 for no limit).
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.shuffle.log.backups</name>
  <value>0</value>
  <description>If yarn.app.mapreduce.shuffle.log.limit.kb and
    yarn.app.mapreduce.shuffle.log.backups are greater than zero
    then a ContainerRollngLogAppender is used instead of ContainerLogAppender
    for syslog.shuffle. See
    org.apache.log4j.RollingFileAppender.maxBackupIndex
  </description>
</property>

<property>
  <name>mapreduce.job.maxtaskfailures.per.tracker</name>
  <value>3</value>
  <description>The number of task-failures on a node manager of a given job
               after which new tasks of that job aren't assigned to it. It
               MUST be less than mapreduce.map.maxattempts and
               mapreduce.reduce.maxattempts otherwise the failed task will
               never be tried on a different node.
  </description>
</property>

<property>
  <name>mapreduce.client.output.filter</name>
  <value>FAILED</value>
  <description>The filter for controlling the output of the task's userlogs sent
               to the console of the JobClient.
               The permissible options are: NONE, KILLED, FAILED, SUCCEEDED and
               ALL.
  </description>
</property>

  <property>
    <name>mapreduce.client.completion.pollinterval</name>
    <value>5000</value>
    <description>The interval (in milliseconds) between which the JobClient
    polls the MapReduce ApplicationMaster for updates about job status. You may want to
    set this to a lower value to make tests run faster on a single node system. Adjusting
    this value in production may lead to unwanted client-server traffic.
    </description>
  </property>

  <property>
    <name>mapreduce.client.progressmonitor.pollinterval</name>
    <value>1000</value>
    <description>The interval (in milliseconds) between which the JobClient
    reports status to the console and checks for job completion. You may want to set this
    to a lower value to make tests run faster on a single node system. Adjusting
    this value in production may lead to unwanted client-server traffic.
    </description>
  </property>

  <property>
    <name>mapreduce.client.libjars.wildcard</name>
    <value>true</value>
    <description>
        Whether the libjars cache files should be localized using
        a wildcarded directory instead of naming each archive independently.
        Using wildcards reduces the space needed for storing the job
        information in the case of a highly available resource manager
        configuration.
        This propery should only be set to false for specific
        jobs which are highly sensitive to the details of the archive
        localization.  Having this property set to true will cause the archives
        to all be localized to the same local cache location.  If false, each
        archive will be localized to its own local cache location.  In both
        cases a symbolic link will be created to every archive from the job's
        working directory.
    </description>
  </property>

  <property>
    <name>mapreduce.task.profile</name>
    <value>false</value>
    <description>To set whether the system should collect profiler
     information for some of the tasks in this job? The information is stored
     in the user log directory. The value is "true" if task profiling
     is enabled.</description>
  </property>

  <property>
    <name>mapreduce.task.profile.maps</name>
    <value>0-2</value>
    <description> To set the ranges of map tasks to profile.
    mapreduce.task.profile has to be set to true for the value to be accounted.
    </description>
  </property>

  <property>
    <name>mapreduce.task.profile.reduces</name>
    <value>0-2</value>
    <description> To set the ranges of reduce tasks to profile.
    mapreduce.task.profile has to be set to true for the value to be accounted.
    </description>
  </property>

  <property>
    <name>mapreduce.task.profile.params</name>
    <value>-agentlib:hprof=cpu=samples,heap=sites,force=n,thread=y,verbose=n,file=%s</value>
    <description>JVM profiler parameters used to profile map and reduce task
      attempts. This string may contain a single format specifier %s that will
      be replaced by the path to profile.out in the task attempt log directory.
      To specify different profiling options for map tasks and reduce tasks,
      more specific parameters mapreduce.task.profile.map.params and
      mapreduce.task.profile.reduce.params should be used.</description>
  </property>

  <property>
    <name>mapreduce.task.profile.map.params</name>
    <value>${mapreduce.task.profile.params}</value>
    <description>Map-task-specific JVM profiler parameters. See
      mapreduce.task.profile.params</description>
  </property>

  <property>
    <name>mapreduce.task.profile.reduce.params</name>
    <value>${mapreduce.task.profile.params}</value>
    <description>Reduce-task-specific JVM profiler parameters. See
      mapreduce.task.profile.params</description>
  </property>

  <property>
    <name>mapreduce.task.skip.start.attempts</name>
    <value>2</value>
    <description> The number of Task attempts AFTER which skip mode
    will be kicked off. When skip mode is kicked off, the
    tasks reports the range of records which it will process
    next, to the MR ApplicationMaster. So that on failures, the MR AM
    knows which ones are possibly the bad records. On further executions,
    those are skipped.
    </description>
  </property>

  <property>
    <name>mapreduce.job.skip.outdir</name>
    <value></value>
    <description> If no value is specified here, the skipped records are
    written to the output directory at _logs/skip.
    User can stop writing skipped records by giving the value "none".
    </description>
  </property>

  <property>
    <name>mapreduce.map.skip.maxrecords</name>
    <value>0</value>
    <description> The number of acceptable skip records surrounding the bad
    record PER bad record in mapper. The number includes the bad record as well.
    To turn the feature of detection/skipping of bad records off, set the
    value to 0.
    The framework tries to narrow down the skipped range by retrying
    until this threshold is met OR all attempts get exhausted for this task.
    Set the value to Long.MAX_VALUE to indicate that framework need not try to
    narrow down. Whatever records(depends on application) get skipped are
    acceptable.
    </description>
  </property>

  <property>
    <name>mapreduce.map.skip.proc-count.auto-incr</name>
    <value>true</value>
    <description>The flag which if set to true,
    SkipBadRecords.COUNTER_MAP_PROCESSED_RECORDS is incremented by
    MapRunner after invoking the map function. This value must be set
    to false for applications which process the records asynchronously
    or buffer the input records. For example streaming. In such cases
    applications should increment this counter on their own.
    </description>
  </property>

  <property>
    <name>mapreduce.reduce.skip.maxgroups</name>
    <value>0</value>
    <description> The number of acceptable skip groups surrounding the bad
    group PER bad group in reducer. The number includes the bad group as well.
    To turn the feature of detection/skipping of bad groups off, set the
    value to 0.
    The framework tries to narrow down the skipped range by retrying
    until this threshold is met OR all attempts get exhausted for this task.
    Set the value to Long.MAX_VALUE to indicate that framework need not try to
    narrow down. Whatever groups(depends on application) get skipped are
    acceptable.
    </description>
  </property>

  <property>
    <name>mapreduce.reduce.skip.proc-count.auto-incr</name>
    <value>true</value>
    <description>The flag which if set to true.
    SkipBadRecords.COUNTER_REDUCE_PROCESSED_GROUPS is incremented by framework
    after invoking the reduce function. This value must be set to false for
    applications which process the records asynchronously or buffer the input
    records. For example streaming. In such cases applications should increment
    this counter on their own.
    </description>
  </property>

  <property>
    <name>mapreduce.ifile.readahead</name>
    <value>true</value>
    <description>Configuration key to enable/disable IFile readahead.
    </description>
  </property>

  <property>
    <name>mapreduce.ifile.readahead.bytes</name>
    <value>4194304</value>
    <description>Configuration key to set the IFile readahead length in bytes.
    </description>
  </property>

<property>
  <name>mapreduce.job.queuename</name>
  <value>default</value>
  <description> Queue to which a job is submitted. This must match one of the
    queues defined in mapred-queues.xml for the system. Also, the ACL setup
    for the queue must allow the current user to submit a job to the queue.
    Before specifying a queue, ensure that the system is configured with
    the queue, and access is allowed for submitting jobs to the queue.
  </description>
</property>

  <property>
    <name>mapreduce.job.tags</name>
    <value></value>
    <description> Tags for the job that will be passed to YARN at submission
      time. Queries to YARN for applications can filter on these tags.
    </description>
  </property>

<property>
  <name>mapreduce.cluster.local.dir</name>
  <value>${hadoop.tmp.dir}/mapred/local</value>
  <description>
      The local directory where MapReduce stores intermediate
      data files.  May be a comma-separated list of
      directories on different devices in order to spread disk i/o.
      Directories that do not exist are ignored.
  </description>
</property>

<property>
  <name>mapreduce.cluster.acls.enabled</name>
  <value>false</value>
  <description> Specifies whether ACLs should be checked
    for authorization of users for doing various queue and job level operations.
    ACLs are disabled by default. If enabled, access control checks are made by
    MapReduce ApplicationMaster when requests are made by users for queue
    operations like submit job to a queue and kill a job in the queue and job
    operations like viewing the job-details (See mapreduce.job.acl-view-job)
    or for modifying the job (See mapreduce.job.acl-modify-job) using
    Map/Reduce APIs, RPCs or via the console and web user interfaces.
    For enabling this flag, set to true in mapred-site.xml file of all
    MapReduce clients (MR job submitting nodes).
  </description>
</property>

<property>
  <name>mapreduce.job.acl-modify-job</name>
  <value> </value>
  <description> Job specific access-control list for 'modifying' the job. It
    is only used if authorization is enabled in Map/Reduce by setting the
    configuration property mapreduce.cluster.acls.enabled to true.
    This specifies the list of users and/or groups who can do modification
    operations on the job. For specifying a list of users and groups the
    format to use is "user1,user2 group1,group". If set to '*', it allows all
    users/groups to modify this job. If set to ' '(i.e. space), it allows
    none. This configuration is used to guard all the modifications with respect
    to this job and takes care of all the following operations:
      o killing this job
      o killing a task of this job, failing a task of this job
      o setting the priority of this job
    Each of these operations are also protected by the per-queue level ACL
    "acl-administer-jobs" configured via mapred-queues.xml. So a caller should
    have the authorization to satisfy either the queue-level ACL or the
    job-level ACL.

    Irrespective of this ACL configuration, (a) job-owner, (b) the user who
    started the cluster, (c) members of an admin configured supergroup
    configured via mapreduce.cluster.permissions.supergroup and (d) queue
    administrators of the queue to which this job was submitted to configured
    via acl-administer-jobs for the specific queue in mapred-queues.xml can
    do all the modification operations on a job.

    By default, nobody else besides job-owner, the user who started the cluster,
    members of supergroup and queue administrators can perform modification
    operations on a job.
  </description>
</property>

<property>
  <name>mapreduce.job.acl-view-job</name>
  <value> </value>
  <description> Job specific access-control list for 'viewing' the job. It is
    only used if authorization is enabled in Map/Reduce by setting the
    configuration property mapreduce.cluster.acls.enabled to true.
    This specifies the list of users and/or groups who can view private details
    about the job. For specifying a list of users and groups the
    format to use is "user1,user2 group1,group". If set to '*', it allows all
    users/groups to modify this job. If set to ' '(i.e. space), it allows
    none. This configuration is used to guard some of the job-views and at
    present only protects APIs that can return possibly sensitive information
    of the job-owner like
      o job-level counters
      o task-level counters
      o tasks' diagnostic information
      o task-logs displayed on the HistoryServer's web-UI and
      o job.xml showed by the HistoryServer's web-UI
    Every other piece of information of jobs is still accessible by any other
    user, for e.g., JobStatus, JobProfile, list of jobs in the queue, etc.

    Irrespective of this ACL configuration, (a) job-owner, (b) the user who
    started the cluster, (c) members of an admin configured supergroup
    configured via mapreduce.cluster.permissions.supergroup and (d) queue
    administrators of the queue to which this job was submitted to configured
    via acl-administer-jobs for the specific queue in mapred-queues.xml can
    do all the view operations on a job.

    By default, nobody else besides job-owner, the user who started the
    cluster, memebers of supergroup and queue administrators can perform
    view operations on a job.
  </description>
</property>

<property>
  <name>mapreduce.job.finish-when-all-reducers-done</name>
  <value>true</value>
  <description>Specifies whether the job should complete once all reducers
     have finished, regardless of whether there are still running mappers.
  </description>
</property>

<property>
  <name>mapreduce.job.token.tracking.ids.enabled</name>
  <value>false</value>
  <description>Whether to write tracking ids of tokens to
    job-conf. When true, the configuration property
    "mapreduce.job.token.tracking.ids" is set to the token-tracking-ids of
    the job</description>
</property>

<property>
  <name>mapreduce.job.token.tracking.ids</name>
  <value></value>
  <description>When mapreduce.job.token.tracking.ids.enabled is
    set to true, this is set by the framework to the
    token-tracking-ids used by the job.</description>
</property>

<property>
  <name>mapreduce.task.merge.progress.records</name>
  <value>10000</value>
  <description> The number of records to process during merge before
   sending a progress notification to the MR ApplicationMaster.
  </description>
</property>

<property>
  <name>mapreduce.task.combine.progress.records</name>
  <value>10000</value>
  <description> The number of records to process during combine output collection
   before sending a progress notification.
  </description>
</property>

<property>
  <name>mapreduce.job.reduce.slowstart.completedmaps</name>
  <value>0.05</value>
  <description>Fraction of the number of maps in the job which should be
  complete before reduces are scheduled for the job.
  </description>
</property>

<property>
<name>mapreduce.job.complete.cancel.delegation.tokens</name>
  <value>true</value>
  <description> if false - do not unregister/cancel delegation tokens from
    renewal, because same tokens may be used by spawned jobs
  </description>
</property>

<property>
  <name>mapreduce.shuffle.port</name>
  <value>13562</value>
  <description>Default port that the ShuffleHandler will run on. ShuffleHandler
   is a service run at the NodeManager to facilitate transfers of intermediate
   Map outputs to requesting Reducers.
  </description>
</property>

<property>
  <name>mapreduce.job.reduce.shuffle.consumer.plugin.class</name>
  <value>org.apache.hadoop.mapreduce.task.reduce.Shuffle</value>
  <description>
  Name of the class whose instance will be used
  to send shuffle requests by reducetasks of this job.
  The class must be an instance of org.apache.hadoop.mapred.ShuffleConsumerPlugin.
  </description>
</property>

<!-- MR YARN Application properties -->

<property>
 <name>mapreduce.job.node-label-expression</name>
  <description>All the containers of the Map Reduce job will be run with this
  node label expression. If the node-label-expression for job is not set, then
  it will use queue's default-node-label-expression for all job's containers.
  </description>
</property>

<property>
  <name>mapreduce.job.am.node-label-expression</name>
  <description>This is node-label configuration for Map Reduce Application Master
  container. If not configured it will make use of
  mapreduce.job.node-label-expression and if job's node-label expression is not
  configured then it will use queue's default-node-label-expression.
  </description>
</property>

<property>
 <name>mapreduce.map.node-label-expression</name>
  <description>This is node-label configuration for Map task containers. If not
  configured it will use mapreduce.job.node-label-expression and if job's
  node-label expression is not configured then it will use queue's
  default-node-label-expression.
  </description>
</property>

<property>
  <name>mapreduce.reduce.node-label-expression</name>
  <description>This is node-label configuration for Reduce task containers. If
  not configured it will use mapreduce.job.node-label-expression and if job's
  node-label expression is not configured then it will use queue's
  default-node-label-expression.
  </description>
</property>

<property>
 <name>mapreduce.job.counters.limit</name>
  <value>120</value>
  <description>Limit on the number of user counters allowed per job.
  </description>
</property>

<property>
  <name>mapreduce.framework.name</name>
  <value>local</value>
  <description>The runtime framework for executing MapReduce jobs.
  Can be one of local, classic or yarn.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.staging-dir</name>
  <value>/tmp/hadoop-yarn/staging</value>
  <description>The staging dir used while submitting jobs.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.staging-dir.erasurecoding.enabled</name>
  <value>false</value>
  <description>Whether Erasure Coding should be enabled for
  files that are copied to the MR staging area. This is a job-level
  setting.
  </description>
</property>

<property>
  <name>mapreduce.am.max-attempts</name>
  <value>2</value>
  <description>The maximum number of application attempts. It is a
  application-specific setting. It should not be larger than the global number
  set by resourcemanager. Otherwise, it will be override. The default number is
  set to 2, to allow at least one retry for AM.</description>
</property>

<!-- Job Notification Configuration -->
<property>
 <name>mapreduce.job.end-notification.url</name>
 <!--<value>http://localhost:8080/jobstatus.php?jobId=$jobId&amp;jobStatus=$jobStatus</value>-->
 <description>Indicates url which will be called on completion of job to inform
              end status of job.
              User can give at most 2 variables with URI : $jobId and $jobStatus.
              If they are present in URI, then they will be replaced by their
              respective values.
</description>
</property>

<property>
  <name>mapreduce.job.end-notification.retry.attempts</name>
  <value>0</value>
  <description>The number of times the submitter of the job wants to retry job
    end notification if it fails. This is capped by
    mapreduce.job.end-notification.max.attempts</description>
</property>

<property>
  <name>mapreduce.job.end-notification.retry.interval</name>
  <value>1000</value>
  <description>The number of milliseconds the submitter of the job wants to
    wait before job end notification is retried if it fails. This is capped by
    mapreduce.job.end-notification.max.retry.interval</description>
</property>

<property>
  <name>mapreduce.job.end-notification.max.attempts</name>
  <value>5</value>
  <final>true</final>
  <description>The maximum number of times a URL will be read for providing job
    end notification. Cluster administrators can set this to limit how long
    after end of a job, the Application Master waits before exiting. Must be
    marked as final to prevent users from overriding this.
  </description>
</property>

  <property>
    <name>mapreduce.job.log4j-properties-file</name>
    <value></value>
    <description>Used to override the default settings of log4j in container-log4j.properties
    for NodeManager. Like container-log4j.properties, it requires certain
    framework appenders properly defined in this overriden file. The file on the
    path will be added to distributed cache and classpath. If no-scheme is given
    in the path, it defaults to point to a log4j file on the local FS.
    </description>
  </property>

<property>
  <name>mapreduce.job.end-notification.max.retry.interval</name>
  <value>5000</value>
  <final>true</final>
  <description>The maximum amount of time (in milliseconds) to wait before
     retrying job end notification. Cluster administrators can set this to
     limit how long the Application Master waits before exiting. Must be marked
     as final to prevent users from overriding this.</description>
</property>

<property>
  <name>yarn.app.mapreduce.am.env</name>
  <value></value>
  <description>User added environment variables for the MR App Master
  processes. Example :
  1) A=foo  This will set the env variable A to foo
  2) B=$B:c This is inherit tasktracker's B env variable.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.admin.user.env</name>
  <value></value>
  <description> Environment variables for the MR App Master
  processes for admin purposes. These values are set first and can be
  overridden by the user env (yarn.app.mapreduce.am.env) Example :
  1) A=foo  This will set the env variable A to foo
  2) B=$B:c This is inherit app master's B env variable.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.command-opts</name>
  <value>-Xmx1024m</value>
  <description>Java opts for the MR App Master processes.
  The following symbol, if present, will be interpolated: @taskid@ is replaced
  by current TaskID. Any other occurrences of '@' will go unchanged.
  For example, to enable verbose gc logging to a file named for the taskid in
  /tmp and to set the heap maximum to be a gigabyte, pass a 'value' of:
        -Xmx1024m -verbose:gc -Xloggc:/tmp/@taskid@.gc

  Usage of -Djava.library.path can cause programs to no longer function if
  hadoop native libraries are used. These values should instead be set as part
  of LD_LIBRARY_PATH in the map / reduce JVM env using the mapreduce.map.env and
  mapreduce.reduce.env config settings.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.admin-command-opts</name>
  <value></value>
  <description>Java opts for the MR App Master processes for admin purposes.
  It will appears before the opts set by yarn.app.mapreduce.am.command-opts and
  thus its options can be overridden user.

  Usage of -Djava.library.path can cause programs to no longer function if
  hadoop native libraries are used. These values should instead be set as part
  of LD_LIBRARY_PATH in the map / reduce JVM env using the mapreduce.map.env and
  mapreduce.reduce.env config settings.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.job.task.listener.thread-count</name>
  <value>30</value>
  <description>The number of threads used to handle RPC calls in the
    MR AppMaster from remote tasks</description>
</property>

<property>
  <name>yarn.app.mapreduce.am.job.client.port-range</name>
  <value></value>
  <description>Range of ports that the MapReduce AM can use when binding.
    Leave blank if you want all possible ports.
    For example 50000-50050,50100-50200</description>
</property>

<property>
  <name>yarn.app.mapreduce.am.webapp.port-range</name>
  <value></value>
  <description>Range of ports that the MapReduce AM can use for its webapp when binding.
    Leave blank if you want all possible ports.
    For example 50000-50050,50100-50200</description>
</property>

<property>
  <name>yarn.app.mapreduce.am.job.committer.cancel-timeout</name>
  <value>60000</value>
  <description>The amount of time in milliseconds to wait for the output
    committer to cancel an operation if the job is killed</description>
</property>

<property>
  <name>yarn.app.mapreduce.am.job.committer.commit-window</name>
  <value>10000</value>
  <description>Defines a time window in milliseconds for output commit
  operations.  If contact with the RM has occurred within this window then
  commits are allowed, otherwise the AM will not allow output commits until
  contact with the RM has been re-established.</description>
</property>

<property>
  <name>mapreduce.fileoutputcommitter.algorithm.version</name>
  <value>2</value>
  <description>The file output committer algorithm version
  valid algorithm version number: 1 or 2
  default to 2, which is the original algorithm

  In algorithm version 1,

  1. commitTask will rename directory
  $joboutput/_temporary/$appAttemptID/_temporary/$taskAttemptID/
  to
  $joboutput/_temporary/$appAttemptID/$taskID/

  2. recoverTask will also do a rename
  $joboutput/_temporary/$appAttemptID/$taskID/
  to
  $joboutput/_temporary/($appAttemptID + 1)/$taskID/

  3. commitJob will merge every task output file in
  $joboutput/_temporary/$appAttemptID/$taskID/
  to
  $joboutput/, then it will delete $joboutput/_temporary/
  and write $joboutput/_SUCCESS

  It has a performance regression, which is discussed in MAPREDUCE-4815.
  If a job generates many files to commit then the commitJob
  method call at the end of the job can take minutes.
  the commit is single-threaded and waits until all
  tasks have completed before commencing.

  algorithm version 2 will change the behavior of commitTask,
  recoverTask, and commitJob.

  1. commitTask will rename all files in
  $joboutput/_temporary/$appAttemptID/_temporary/$taskAttemptID/
  to $joboutput/

  2. recoverTask actually doesn't require to do anything, but for
  upgrade from version 1 to version 2 case, it will check if there
  are any files in
  $joboutput/_temporary/($appAttemptID - 1)/$taskID/
  and rename them to $joboutput/

  3. commitJob can simply delete $joboutput/_temporary and write
  $joboutput/_SUCCESS

  This algorithm will reduce the output commit time for
  large jobs by having the tasks commit directly to the final
  output directory as they were completing and commitJob had
  very little to do.
  </description>
</property>

<property>
  <name>mapreduce.fileoutputcommitter.task.cleanup.enabled</name>
  <value>false</value>
  <description>Whether tasks should delete their task temporary directories. This is purely an
    optimization for filesystems without O(1) recursive delete, as commitJob will recursively delete
    the entire job temporary directory. HDFS has O(1) recursive delete, so this parameter is left
    false by default. Users of object stores, for example, may want to set this to true.

    Note: this is only used if mapreduce.fileoutputcommitter.algorithm.version=2</description>
</property>

<property>
  <name>yarn.app.mapreduce.am.scheduler.heartbeat.interval-ms</name>
  <value>1000</value>
  <description>The interval in ms at which the MR AppMaster should send
    heartbeats to the ResourceManager</description>
</property>

<property>
  <name>yarn.app.mapreduce.client-am.ipc.max-retries</name>
  <value>3</value>
  <description>The number of client retries to the AM - before reconnecting
    to the RM to fetch Application Status.</description>
</property>

<property>
  <name>yarn.app.mapreduce.client-am.ipc.max-retries-on-timeouts</name>
  <value>3</value>
  <description>The number of client retries on socket timeouts to the AM - before
    reconnecting to the RM to fetch Application Status.</description>
</property>

<property>
  <name>yarn.app.mapreduce.client.max-retries</name>
  <value>3</value>
  <description>The number of client retries to the RM/HS before
    throwing exception. This is a layer above the ipc.</description>
</property>

<property>
  <name>yarn.app.mapreduce.am.resource.mb</name>
  <value>1536</value>
  <description>The amount of memory the MR AppMaster needs.</description>
</property>

<property>
  <name>yarn.app.mapreduce.am.resource.cpu-vcores</name>
  <value>1</value>
  <description>
      The number of virtual CPU cores the MR AppMaster needs.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.hard-kill-timeout-ms</name>
  <value>10000</value>
  <description>
     Number of milliseconds to wait before the job client kills the application.
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.client.job.max-retries</name>
  <value>3</value>
  <description>The number of retries the client will make for getJob and
    dependent calls.
    This is needed for non-HDFS DFS where additional, high level
    retries are required to avoid spurious failures during the getJob call.
    30 is a good value for WASB</description>
</property>

<property>
  <name>yarn.app.mapreduce.client.job.retry-interval</name>
  <value>2000</value>
  <description>The delay between getJob retries in ms for retries configured
  with yarn.app.mapreduce.client.job.max-retries.</description>
</property>

<property>
  <description>CLASSPATH for MR applications. A comma-separated list
  of CLASSPATH entries. If mapreduce.application.framework is set then this
  must specify the appropriate classpath for that archive, and the name of
  the archive must be present in the classpath.
  If mapreduce.app-submission.cross-platform is false, platform-specific
  environment vairable expansion syntax would be used to construct the default
  CLASSPATH entries.
  For Linux:
  $HADOOP_MAPRED_HOME/share/hadoop/mapreduce/*,
  $HADOOP_MAPRED_HOME/share/hadoop/mapreduce/lib/*.
  For Windows:
  %HADOOP_MAPRED_HOME%/share/hadoop/mapreduce/*,
  %HADOOP_MAPRED_HOME%/share/hadoop/mapreduce/lib/*.

  If mapreduce.app-submission.cross-platform is true, platform-agnostic default
  CLASSPATH for MR applications would be used:
  {{HADOOP_MAPRED_HOME}}/share/hadoop/mapreduce/*,
  {{HADOOP_MAPRED_HOME}}/share/hadoop/mapreduce/lib/*
  Parameter expansion marker will be replaced by NodeManager on container
  launch based on the underlying OS accordingly.
  </description>
   <name>mapreduce.application.classpath</name>
   <value></value>
</property>

<property>
  <description>If enabled, user can submit an application cross-platform
  i.e. submit an application from a Windows client to a Linux/Unix server or
  vice versa.
  </description>
  <name>mapreduce.app-submission.cross-platform</name>
  <value>false</value>
</property>

<property>
  <description>Path to the MapReduce framework archive. If set, the framework
    archive will automatically be distributed along with the job, and this
    path would normally reside in a public location in an HDFS filesystem. As
    with distributed cache files, this can be a URL with a fragment specifying
    the alias to use for the archive name. For example,
    hdfs:/mapred/framework/hadoop-mapreduce-2.1.1.tar.gz#mrframework would
    alias the localized archive as "mrframework".

    Note that mapreduce.application.classpath must include the appropriate
    classpath for the specified framework. The base name of the archive, or
    alias of the archive if an alias is used, must appear in the specified
    classpath.
  </description>
   <name>mapreduce.application.framework.path</name>
   <value></value>
</property>

<property>
   <name>mapreduce.job.classloader</name>
   <value>false</value>
  <description>Whether to use a separate (isolated) classloader for
    user classes in the task JVM.</description>
</property>

<property>
   <name>mapreduce.job.classloader.system.classes</name>
   <value></value>
  <description>Used to override the default definition of the system classes for
    the job classloader. The system classes are a comma-separated list of
    patterns that indicate whether to load a class from the system classpath,
    instead from the user-supplied JARs, when mapreduce.job.classloader is
    enabled.

    A positive pattern is defined as:
        1. A single class name 'C' that matches 'C' and transitively all nested
            classes 'C$*' defined in C;
        2. A package name ending with a '.' (e.g., "com.example.") that matches
            all classes from that package.
    A negative pattern is defined by a '-' in front of a positive pattern
    (e.g., "-com.example.").

    A class is considered a system class if and only if it matches one of the
    positive patterns and none of the negative ones. More formally:
    A class is a member of the inclusion set I if it matches one of the positive
    patterns. A class is a member of the exclusion set E if it matches one of
    the negative patterns. The set of system classes S = I \ E.
  </description>
</property>

<property>
   <name>mapreduce.jvm.system-properties-to-log</name>
   <value>os.name,os.version,java.home,java.runtime.version,java.vendor,java.version,java.vm.name,java.class.path,java.io.tmpdir,user.dir,user.name</value>
   <description>Comma-delimited list of system properties to log on mapreduce JVM start</description>
</property>

<!-- jobhistory properties -->

<property>
  <name>mapreduce.jobhistory.address</name>
  <value>0.0.0.0:10020</value>
  <description>MapReduce JobHistory Server IPC host:port</description>
</property>

<property>
  <name>mapreduce.jobhistory.webapp.address</name>
  <value>0.0.0.0:19888</value>
  <description>MapReduce JobHistory Server Web UI host:port</description>
</property>

<property>
  <name>mapreduce.jobhistory.webapp.https.address</name>
  <value>0.0.0.0:19890</value>
  <description>
    The https address the MapReduce JobHistory Server WebApp is on.
  </description>
</property>

<property>
  <name>mapreduce.jobhistory.keytab</name>
  <description>
    Location of the kerberos keytab file for the MapReduce
    JobHistory Server.
  </description>
  <value>/etc/security/keytab/jhs.service.keytab</value>
</property>

<property>
  <name>mapreduce.jobhistory.principal</name>
  <description>
    Kerberos principal name for the MapReduce JobHistory Server.
  </description>
  <value>jhs/_HOST@REALM.TLD</value>
</property>

<property>
  <name>mapreduce.jobhistory.intermediate-done-dir</name>
  <value>${yarn.app.mapreduce.am.staging-dir}/history/done_intermediate</value>
  <description></description>
</property>

<property>
  <name>mapreduce.jobhistory.intermediate-user-done-dir.permissions</name>
  <value>770</value>
  <description>The permissions of the user directories in
  ${mapreduce.jobhistory.intermediate-done-dir}. The user and the group
  permission must be 7, this is enforced.
  </description>
</property>

<property>
  <name>mapreduce.jobhistory.done-dir</name>
  <value>${yarn.app.mapreduce.am.staging-dir}/history/done</value>
  <description></description>
</property>

<property>
  <name>mapreduce.jobhistory.cleaner.enable</name>
  <value>true</value>
  <description></description>
</property>

<property>
  <name>mapreduce.jobhistory.cleaner.interval-ms</name>
  <value>86400000</value>
  <description> How often the job history cleaner checks for files to delete,
  in milliseconds. Defaults to 86400000 (one day). Files are only deleted if
  they are older than mapreduce.jobhistory.max-age-ms.
  </description>
</property>

<property>
  <name>mapreduce.jobhistory.max-age-ms</name>
  <value>604800000</value>
  <description> Job history files older than this many milliseconds will
  be deleted when the history cleaner runs. Defaults to 604800000 (1 week).
  </description>
</property>

<property>
  <name>mapreduce.jobhistory.client.thread-count</name>
  <value>10</value>
  <description>The number of threads to handle client API requests</description>
</property>

<property>
  <name>mapreduce.jobhistory.datestring.cache.size</name>
  <value>200000</value>
  <description>Size of the date string cache. Effects the number of directories
  which will be scanned to find a job.</description>
</property>

<property>
  <name>mapreduce.jobhistory.joblist.cache.size</name>
  <value>20000</value>
  <description>Size of the job list cache</description>
</property>

<property>
  <name>mapreduce.jobhistory.loadedjobs.cache.size</name>
  <value>5</value>
  <description>Size of the loaded job cache.  This property is ignored if
  the property mapreduce.jobhistory.loadedtasks.cache.size is set to a
  positive value.
  </description>
</property>

<property>
  <name>mapreduce.jobhistory.loadedtasks.cache.size</name>
  <value></value>
  <description>Change the job history cache limit to be set in terms
  of total task count.  If the total number of tasks loaded exceeds
  this value, then the job cache will be shrunk down until it is
  under this limit (minimum 1 job in cache).  If this value is empty
  or nonpositive then the cache reverts to using the property
  mapreduce.jobhistory.loadedjobs.cache.size as a job cache size.

  Two recommendations for the mapreduce.jobhistory.loadedtasks.cache.size
  property:
  1) For every 100k of cache size, set the heap size of the Job History
     Server to 1.2GB. For example,
     mapreduce.jobhistory.loadedtasks.cache.size=500000, heap size=6GB.
  2) Make sure that the cache size is larger than the number of tasks
     required for the largest job run on the cluster. It might be a good
     idea to set the value slightly higher (say, 20%) in order to allow
     for job size growth.
  </description>
</property>

<property>
  <name>mapreduce.jobhistory.move.interval-ms</name>
  <value>180000</value>
  <description>Scan for history files to more from intermediate done dir to done
  dir at this frequency.
  </description>
</property>

<property>
  <name>mapreduce.jobhistory.move.thread-count</name>
  <value>3</value>
  <description>The number of threads used to move files.</description>
</property>

<property>
  <name>mapreduce.jobhistory.store.class</name>
  <value></value>
  <description>The HistoryStorage class to use to cache history data.</description>
</property>

<property>
  <name>mapreduce.jobhistory.minicluster.fixed.ports</name>
  <value>false</value>
  <description>Whether to use fixed ports with the minicluster</description>
</property>

<property>
  <name>mapreduce.jobhistory.admin.address</name>
  <value>0.0.0.0:10033</value>
  <description>The address of the History server admin interface.</description>
</property>

<property>
  <name>mapreduce.jobhistory.admin.acl</name>
  <value>*</value>
  <description>ACL of who can be admin of the History server.</description>
</property>

<property>
  <name>mapreduce.jobhistory.recovery.enable</name>
  <value>false</value>
  <description>Enable the history server to store server state and recover
  server state upon startup.  If enabled then
  mapreduce.jobhistory.recovery.store.class must be specified.</description>
</property>

<property>
  <name>mapreduce.jobhistory.recovery.store.class</name>
  <value>org.apache.hadoop.mapreduce.v2.hs.HistoryServerFileSystemStateStoreService</value>
  <description>The HistoryServerStateStoreService class to store history server
  state for recovery.</description>
</property>

<property>
  <name>mapreduce.jobhistory.recovery.store.fs.uri</name>
  <value>${hadoop.tmp.dir}/mapred/history/recoverystore</value>
  <!--value>hdfs://localhost:9000/mapred/history/recoverystore</value-->
  <description>The URI where history server state will be stored if
  HistoryServerFileSystemStateStoreService is configured as the recovery
  storage class.</description>
</property>

<property>
  <name>mapreduce.jobhistory.recovery.store.leveldb.path</name>
  <value>${hadoop.tmp.dir}/mapred/history/recoverystore</value>
  <description>The URI where history server state will be stored if
  HistoryServerLeveldbSystemStateStoreService is configured as the recovery
  storage class.</description>
</property>

<property>
  <name>mapreduce.jobhistory.http.policy</name>
  <value>HTTP_ONLY</value>
  <description>
    This configures the HTTP endpoint for JobHistoryServer web UI.
    The following values are supported:
    - HTTP_ONLY : Service is provided only on http
    - HTTPS_ONLY : Service is provided only on https
  </description>
</property>

<property>
  <name>mapreduce.jobhistory.jobname.limit</name>
  <value>50</value>
  <description>
     Number of characters allowed for job name in Job History Server web page.
  </description>
</property>

<property>
  <description>
  File format the AM will use when generating the .jhist file.  Valid
  values are "json" for text output and "binary" for faster parsing.
  </description>
  <name>mapreduce.jobhistory.jhist.format</name>
  <value>binary</value>
</property>

<property>
  <name>mapreduce.job.heap.memory-mb.ratio</name>
  <value>0.8</value>
  <description>The ratio of heap-size to container-size. If no -Xmx is
    specified, it is calculated as
    (mapreduce.{map|reduce}.memory.mb * mapreduce.heap.memory-mb.ratio).
    If -Xmx is specified but not mapreduce.{map|reduce}.memory.mb, it is
    calculated as (heapSize / mapreduce.heap.memory-mb.ratio).
  </description>
</property>

<property>
  <name>yarn.app.mapreduce.am.containerlauncher.threadpool-initial-size</name>
  <value>10</value>
  <description>The initial size of thread pool to launch containers in the
    app master.
  </description>
</property>

<property>
  <name>mapreduce.task.exit.timeout</name>
  <value>60000</value>
  <description>The number of milliseconds before a task will be
  terminated if it stays in finishing state for too long.
  After a task attempt completes from TaskUmbilicalProtocol's point of view,
  it will be transitioned to finishing state. That will give a chance for the
  task to exit by itself.
  </description>
</property>

<property>
  <name>mapreduce.task.exit.timeout.check-interval-ms</name>
  <value>20000</value>
  <description>The interval in milliseconds between which the MR framework
  checks if task attempts stay in finishing state for too long.
  </description>
</property>

<property>
  <name>mapreduce.job.encrypted-intermediate-data</name>
  <value>false</value>
  <description>Encrypt intermediate MapReduce spill files or not
  default is false</description>
</property>

<property>
  <name>mapreduce.job.encrypted-intermediate-data-key-size-bits</name>
  <value>128</value>
  <description>Mapreduce encrypt data key size default is 128</description>
</property>

<property>
  <name>mapreduce.job.encrypted-intermediate-data.buffer.kb</name>
  <value>128</value>
  <description>Buffer size for intermediate encrypt data in kb
  default is 128</description>
</property>

<property>
  <name>mapreduce.task.local-fs.write-limit.bytes</name>
  <value>-1</value>
  <description>Limit on the byte written to the local file system by each task.
  This limit only applies to writes that go through the Hadoop filesystem APIs
  within the task process (i.e.: writes that will update the local filesystem's
  BYTES_WRITTEN counter). It does not cover other writes such as logging,
  sideband writes from subprocesses (e.g.: streaming jobs), etc.
  Negative values disable the limit.
  default is -1</description>
</property>

<property>
  <description>
    Enable the CSRF filter for the job history web app
  </description>
  <name>mapreduce.jobhistory.webapp.rest-csrf.enabled</name>
  <value>false</value>
</property>

<property>
  <description>
    Optional parameter that indicates the custom header name to use for CSRF
    protection.
  </description>
  <name>mapreduce.jobhistory.webapp.rest-csrf.custom-header</name>
  <value>X-XSRF-Header</value>
</property>

<property>
  <description>
    Optional parameter that indicates the list of HTTP methods that do not
    require CSRF protection
  </description>
  <name>mapreduce.jobhistory.webapp.rest-csrf.methods-to-ignore</name>
  <value>GET,OPTIONS,HEAD</value>
</property>

<property>
  <name>mapreduce.job.cache.limit.max-resources</name>
  <value>0</value>
  <description>The maximum number of resources a map reduce job is allowed to
    submit for localization via files, libjars, archives, and jobjar command
    line arguments and through the distributed cache. If set to 0 the limit is
    ignored.
  </description>
</property>

<property>
  <name>mapreduce.job.cache.limit.max-resources-mb</name>
  <value>0</value>
  <description>The maximum size (in MB) a map reduce job is allowed to submit
    for localization via files, libjars, archives, and jobjar command line
    arguments and through the distributed cache. If set to 0 the limit is
    ignored.
  </description>
</property>

<property>
  <name>mapreduce.job.cache.limit.max-single-resource-mb</name>
  <value>0</value>
  <description>The maximum size (in MB) of a single resource a map reduce job
    is allow to submit for localization via files, libjars, archives, and
    jobjar command line arguments and through the distributed cache. If set to
    0 the limit is ignored.
  </description>
</property>

<property>
  <description>
    Value of the xframe-options
  </description>
  <name>mapreduce.jobhistory.webapp.xfs-filter.xframe-options</name>
  <value>SAMEORIGIN</value>
</property>

<property>
  <description>
    The maximum number of tasks that a job can have so that the Job History
    Server will fully parse its associated job history file and load it into
    memory. A value of -1 (default) will allow all jobs to be loaded.
  </description>
  <name>mapreduce.jobhistory.loadedjob.tasks.max</name>
  <value>-1</value>
</property>

<property>
  <description>
    The list of job configuration properties whose value will be redacted.
  </description>
  <name>mapreduce.job.redacted-properties</name>
  <value></value>
</property>

<property>
  <description>
    This configuration is a regex expression. The list of configurations that
    match the regex expression will be sent to RM. RM will use these
    configurations for renewing tokens.
    This configuration is added for below scenario: User needs to run distcp
    jobs across two clusters, but the RM does not have necessary hdfs
    configurations to connect to the remote hdfs cluster. Hence, user relies on
    this config to send the configurations to RM and RM uses these
    configurations to renew tokens.
    For example the following regex expression indicates the minimum required
    configs for RM to connect to a remote hdfs cluster:
    dfs.nameservices|^dfs.namenode.rpc-address.*$|^dfs.ha.namenodes.*$|^dfs.client.failover.proxy.provider.*$|dfs.namenode.kerberos.principal
  </description>
  <name>mapreduce.job.send-token-conf</name>
  <value></value>
</property>

<property>
  <description>
    The name of an output committer factory for MRv2 FileOutputFormat to use
    for committing work. If set, overrides any per-filesystem committer
    defined for the destination filesystem.
  </description>
  <name>mapreduce.outputcommitter.factory.class</name>
  <value></value>
</property>


<property>
  <name>mapreduce.outputcommitter.factory.scheme.s3a</name>
  <value>org.apache.hadoop.fs.s3a.commit.S3ACommitterFactory</value>
  <description>
    The committer factory to use when writing data to S3A filesystems.
    If mapreduce.outputcommitter.factory.class is set, it will
    override this property.
  </description>
</property>

</configuration>