hadoop/hadoop-hdfs-project/hadoop-hdfs/src/site/apt/WebHDFS.apt.vm

~~ Licensed under the Apache License, Version 2.0 (the "License");
~~ you may not use this file except in compliance with the License.
~~ You may obtain a copy of the License at
~~
~~   http://www.apache.org/licenses/LICENSE-2.0
~~
~~ Unless required by applicable law or agreed to in writing, software
~~ distributed under the License is distributed on an "AS IS" BASIS,
~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
~~ See the License for the specific language governing permissions and
~~ limitations under the License. See accompanying LICENSE file.

  ---
  Hadoop Distributed File System-${project.version} - WebHDFS REST API
  ---
  ---
  ${maven.build.timestamp}

WebHDFS REST API

  \[ {{{./index.html}Go Back}} \]

%{toc|section=1|fromDepth=0}

* {Document Conventions}

*----------------------+-------------------------------------------------------------------------------+
| <<<Monospaced>>>     | Used for commands, HTTP request and responses and code blocks.                |
*----------------------+-------------------------------------------------------------------------------+
| <<<\<Monospaced\>>>> | User entered values.                                                          |
*----------------------+-------------------------------------------------------------------------------+
| <<<[Monospaced]>>>   | Optional values.  When the value is not specified, the default value is used. |
*----------------------+-------------------------------------------------------------------------------+
| <Italics>            | Important phrases and words.                                                  |
*----------------------+-------------------------------------------------------------------------------+


* {Introduction}

  The HTTP REST API supports the complete
  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}/{{{../../api/org/apache/hadoop/fs/FileContext.html}FileContext}}
  interface for HDFS.
  The operations and the corresponding FileSystem/FileContext methods are shown in the next section.
  The Section {{HTTP Query Parameter Dictionary}} specifies the parameter details
  such as the defaults and the valid values.

** {Operations}

  * HTTP GET

    * {{{Open and Read a File}<<<OPEN>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.open)

    * {{{Status of a File/Directory}<<<GETFILESTATUS>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getFileStatus)

    * {{<<<LISTSTATUS>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.listStatus)

    * {{{Get Content Summary of a Directory}<<<GETCONTENTSUMMARY>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getContentSummary)

    * {{{Get File Checksum}<<<GETFILECHECKSUM>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getFileChecksum)

    * {{{Get Home Directory}<<<GETHOMEDIRECTORY>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getHomeDirectory)

    * {{{Get Delegation Token}<<<GETDELEGATIONTOKEN>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getDelegationToken)

    * {{{Get Delegation Tokens}<<<GETDELEGATIONTOKENS>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getDelegationTokens)

  * HTTP PUT

    * {{{Create and Write to a File}<<<CREATE>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.create)

    * {{{Make a Directory}<<<MKDIRS>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.mkdirs)

    * {{{Create a Symbolic Link}<<<CREATESYMLINK>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileContext.html}FileContext}}.createSymlink)

    * {{{Rename a File/Directory}<<<RENAME>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.rename)

    * {{{Set Replication Factor}<<<SETREPLICATION>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.setReplication)

    * {{{Set Owner}<<<SETOWNER>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.setOwner)

    * {{{Set Permission}<<<SETPERMISSION>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.setPermission)

    * {{{Set Access or Modification Time}<<<SETTIMES>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.setTimes)

    * {{{Renew Delegation Token}<<<RENEWDELEGATIONTOKEN>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.renewDelegationToken)

    * {{{Cancel Delegation Token}<<<CANCELDELEGATIONTOKEN>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.cancelDelegationToken)

  * HTTP POST

    * {{{Append to a File}<<<APPEND>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.append)

    * {{{Concatenate Files}<<<CONCAT>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.concat)

  * HTTP DELETE

    * {{{Delete a File/Directory}<<<DELETE>>>}}
        (see  {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.delete)

** {FileSystem URIs vs HTTP URLs}

  The FileSystem scheme of WebHDFS is "<<<webhdfs://>>>".
  A WebHDFS FileSystem URI has the following format.

+---------------------------------
  webhdfs://<HOST>:<HTTP_PORT>/<PATH>
+---------------------------------

  The above WebHDFS URI corresponds to the below HDFS URI.

+---------------------------------
  hdfs://<HOST>:<RPC_PORT>/<PATH>
+---------------------------------

  In the REST API, the prefix "<<</webhdfs/v1>>>" is inserted in the path and a query is appended at the end.
  Therefore, the corresponding HTTP URL has the following format.

+---------------------------------
  http://<HOST>:<HTTP_PORT>/webhdfs/v1/<PATH>?op=...
+---------------------------------

** {HDFS Configuration Options}

  Below are the HDFS configuration options for WebHDFS.

*-------------------------------------------------+---------------------------------------------------+
|| Property Name	                          || Description                                      |
*-------------------------------------------------+---------------------------------------------------+
| <<<dfs.webhdfs.enabled                      >>> | Enable/disable WebHDFS in Namenodes and Datanodes |
*-------------------------------------------------+---------------------------------------------------+
| <<<dfs.web.authentication.kerberos.principal>>> | The HTTP Kerberos principal used by Hadoop-Auth in the HTTP endpoint. The HTTP Kerberos principal MUST start with 'HTTP/' per Kerberos HTTP SPNEGO specification. |
*-------------------------------------------------+---------------------------------------------------+
| <<<dfs.web.authentication.kerberos.keytab   >>> | The Kerberos keytab file with the credentials for the HTTP Kerberos principal used by Hadoop-Auth in the HTTP endpoint. |
*-------------------------------------------------+---------------------------------------------------+

* {Authentication}

  When security is <off>, the authenticated user is the username specified in the <<<user.name>>> query parameter.
  If the <<<user.name>>> parameter is not set,
  the server may either set the authenticated user to a default web user, if there is any, or return an error response.


  When security is <on>, authentication is performed by either Hadoop delegation token or Kerberos SPNEGO.
  If a token is set in the <<<delegation>>> query parameter, the authenticated user is the user encoded in the token.
  If the <<<delegation>>> parameter is not set, the user is authenticated by Kerberos SPNEGO.


  Below are examples using the <<<curl>>> command tool.

  [[1]] Authentication when security is off:

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?[user.name=<USER>&]op=..."
+---------------------------------
 
  [[1]] Authentication using Kerberos SPNEGO when security is on:

+---------------------------------
curl -i --negotiate -u : "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=..."
+---------------------------------
 
  [[1]] Authentication using Hadoop delegation token when security is on:

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?delegation=<TOKEN>&op=..."
+---------------------------------

  []
 
  See also: {{{../hadoop-common/HttpAuthentication.html}Authentication for Hadoop HTTP web-consoles}}

* {Proxy Users}

  When the proxy user feature is enabled, a proxy user <P> may submit a request on behalf of another user <U>.
  The username of <U> must be specified in the <<<doas>>> query parameter unless a delegation token is presented in authentication.
  In such case, the information of both users <P> and <U> must be encoded in the delegation token.

  [[1]] A proxy request when security is off:

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?[user.name=<USER>&]doas=<USER>&op=..."
+---------------------------------

  [[1]] A proxy request using Kerberos SPNEGO when security is on:

+---------------------------------
curl -i --negotiate -u : "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?doas=<USER>&op=..."
+---------------------------------

  [[1]] A proxy request using Hadoop delegation token when security is on:

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?delegation=<TOKEN>&op=..."
+---------------------------------


* {File and Directory Operations}

** {Create and Write to a File}

  * Step 1: Submit a HTTP PUT request without automatically following redirects and without sending the file data.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=CREATE
                    [&overwrite=<true|false>][&blocksize=<LONG>][&replication=<SHORT>]
                    [&permission=<OCTAL>][&buffersize=<INT>]"
+---------------------------------

  The request is redirected to a datanode where the file data is to be written:

+---------------------------------
HTTP/1.1 307 TEMPORARY_REDIRECT
Location: http://<DATANODE>:<PORT>/webhdfs/v1/<PATH>?op=CREATE...
Content-Length: 0
+---------------------------------

  * Step 2: Submit another HTTP PUT request using the URL in the <<<Location>>> header with the file data to be written.

+---------------------------------
curl -i -X PUT -T <LOCAL_FILE> "http://<DATANODE>:<PORT>/webhdfs/v1/<PATH>?op=CREATE..."
+---------------------------------

  The client receives a <<<201 Created>>> response with zero content length
  and the WebHDFS URI of the file in the <<<Location>>> header:

+---------------------------------
HTTP/1.1 201 Created
Location: webhdfs://<HOST>:<PORT>/<PATH>
Content-Length: 0
+---------------------------------

  []

  <<Note>> that the reason of having two-step create/append is
  for preventing clients to send out data before the redirect.
  This issue is addressed by the "<<<Expect: 100-continue>>>" header in HTTP/1.1;
  see {{{http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.2.3}RFC 2616, Section 8.2.3}}.
  Unfortunately, there are software library bugs (e.g. Jetty 6 HTTP server and Java 6 HTTP client),
  which do not correctly implement "<<<Expect: 100-continue>>>".
  The two-step create/append is a temporary workaround for the software library bugs.

  See also:
  {{{Overwrite}<<<overwrite>>>}},
  {{{Block Size}<<<blocksize>>>}},
  {{{Replication}<<<replication>>>}},
  {{{Permission}<<<permission>>>}},
  {{{Buffer Size}<<<buffersize>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.create


** {Append to a File}

  * Step 1: Submit a HTTP POST request without automatically following redirects and without sending the file data.

+---------------------------------
curl -i -X POST "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=APPEND[&buffersize=<INT>]"
+---------------------------------

  The request is redirected to a datanode where the file data is to be appended:

+---------------------------------
HTTP/1.1 307 TEMPORARY_REDIRECT
Location: http://<DATANODE>:<PORT>/webhdfs/v1/<PATH>?op=APPEND...
Content-Length: 0
+---------------------------------

  * Step 2: Submit another HTTP POST request using the URL in the <<<Location>>> header with the file data to be appended.

+---------------------------------
curl -i -X POST -T <LOCAL_FILE> "http://<DATANODE>:<PORT>/webhdfs/v1/<PATH>?op=APPEND..."
+---------------------------------

  The client receives a response with zero content length:

+---------------------------------
HTTP/1.1 200 OK
Content-Length: 0
+---------------------------------

  []

  See the note in the previous section for the description of why this operation requires two steps.

  See also:
  {{{Buffer Size}<<<buffersize>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.append


** {Concat File(s)}

  * Submit a HTTP POST request.

+---------------------------------
curl -i -X POST "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=CONCAT&sources=<PATHS>"
+---------------------------------

  The client receives a response with zero content length:

+---------------------------------
HTTP/1.1 200 OK
Content-Length: 0
+---------------------------------

  []

  See also:
  {{{Sources}<<<sources>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.concat


** {Open and Read a File}

  * Submit a HTTP GET request with automatically following redirects.

+---------------------------------
curl -i -L "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=OPEN
                    [&offset=<LONG>][&length=<LONG>][&buffersize=<INT>]"
+---------------------------------

  The request is redirected to a datanode where the file data can be read:

+---------------------------------
HTTP/1.1 307 TEMPORARY_REDIRECT
Location: http://<DATANODE>:<PORT>/webhdfs/v1/<PATH>?op=OPEN...
Content-Length: 0
+---------------------------------

  The client follows the redirect to the datanode and receives the file data:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/octet-stream
Content-Length: 22

Hello, webhdfs user!
+---------------------------------

  []

  See also:
  {{{Offset}<<<offset>>>}},
  {{{Length}<<<length>>>}},
  {{{Buffer Size}<<<buffersize>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.open


** {Make a Directory}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/<PATH>?op=MKDIRS[&permission=<OCTAL>]"
+---------------------------------

  The client receives a response with a {{{Boolean JSON Schema}<<<boolean>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{"boolean": true}
+---------------------------------

  []

  See also:
  {{{Permission}<<<permission>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.mkdirs


** {Create a Symbolic Link}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/<PATH>?op=CREATESYMLINK
                              &destination=<PATH>[&createParent=<true|false>]"
+---------------------------------

  The client receives a response with zero content length:

+---------------------------------
HTTP/1.1 200 OK
Content-Length: 0
+---------------------------------

  []

  See also:
  {{{Destination}<<<destination>>>}},
  {{{Create Parent}<<<createParent>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.createSymlink


** {Rename a File/Directory}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "<HOST>:<PORT>/webhdfs/v1/<PATH>?op=RENAME&destination=<PATH>"
+---------------------------------

  The client receives a response with a {{{Boolean JSON Schema}<<<boolean>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{"boolean": true}
+---------------------------------

  []

  See also:
  {{{Destination}<<<destination>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.rename


** {Delete a File/Directory}

  * Submit a HTTP DELETE request.

+---------------------------------
curl -i -X DELETE "http://<host>:<port>/webhdfs/v1/<path>?op=DELETE
                              [&recursive=<true|false>]"
+---------------------------------

  The client receives a response with a {{{Boolean JSON Schema}<<<boolean>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{"boolean": true}
+---------------------------------

  []

  See also:
  {{{Recursive}<<<recursive>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.delete


** {Status of a File/Directory}

  * Submit a HTTP GET request.

+---------------------------------
curl -i  "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=GETFILESTATUS"
+---------------------------------

  The client receives a response with a {{{FileStatus JSON Schema}<<<FileStatus>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{
  "FileStatus":
  {
    "accessTime"      : 0,
    "blockSize"       : 0,
    "group"           : "supergroup",
    "length"          : 0,             //in bytes, zero for directories
    "modificationTime": 1320173277227,
    "owner"           : "webuser",
    "pathSuffix"      : "",
    "permission"      : "777",
    "replication"     : 0,
    "type"            : "DIRECTORY"    //enum {FILE, DIRECTORY, SYMLINK}
  }
}
+---------------------------------

  []

  See also:
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getFileStatus


** {List a Directory}

  * Submit a HTTP GET request.

+---------------------------------
curl -i  "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=LISTSTATUS"
+---------------------------------

  The client receives a response with a {{{FileStatuses JSON Schema}<<<FileStatuses>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 427

{
  "FileStatuses":
  {
    "FileStatus":
    [
      {
        "accessTime"      : 1320171722771,
        "blockSize"       : 33554432,
        "group"           : "supergroup",
        "length"          : 24930,
        "modificationTime": 1320171722771,
        "owner"           : "webuser",
        "pathSuffix"      : "a.patch",
        "permission"      : "644",
        "replication"     : 1,
        "type"            : "FILE"
      },
      {
        "accessTime"      : 0,
        "blockSize"       : 0,
        "group"           : "supergroup",
        "length"          : 0,
        "modificationTime": 1320895981256,
        "owner"           : "szetszwo",
        "pathSuffix"      : "bar",
        "permission"      : "711",
        "replication"     : 0,
        "type"            : "DIRECTORY"
      },
      ...
    ]
  }
}
+---------------------------------

  []

  See also:
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.listStatus


* {Other File System Operations}

** {Get Content Summary of a Directory}

  * Submit a HTTP GET request.

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=GETCONTENTSUMMARY"
+---------------------------------

  The client receives a response with a {{{ContentSummary JSON Schema}<<<ContentSummary>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{
  "ContentSummary":
  {
    "directoryCount": 2,
    "fileCount"     : 1,
    "length"        : 24930,
    "quota"         : -1,
    "spaceConsumed" : 24930,
    "spaceQuota"    : -1
  }
}
+---------------------------------

  []

  See also:
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getContentSummary


** {Get File Checksum}

  * Submit a HTTP GET request.

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=GETFILECHECKSUM"
+---------------------------------

  The request is redirected to a datanode:

+---------------------------------
HTTP/1.1 307 TEMPORARY_REDIRECT
Location: http://<DATANODE>:<PORT>/webhdfs/v1/<PATH>?op=GETFILECHECKSUM...
Content-Length: 0
+---------------------------------

  The client follows the redirect to the datanode and receives a {{{FileChecksum JSON Schema}<<<FileChecksum>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{
  "FileChecksum":
  {
    "algorithm": "MD5-of-1MD5-of-512CRC32",
    "bytes"    : "eadb10de24aa315748930df6e185c0d ...",
    "length"   : 28
  }
}
+---------------------------------

  []

  See also:
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getFileChecksum


** {Get Home Directory}

  * Submit a HTTP GET request.

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/?op=GETHOMEDIRECTORY"
+---------------------------------

  The client receives a response with a {{{Path JSON Schema}<<<Path>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{"Path": "/user/szetszwo"}
+---------------------------------

  []

  See also:
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getHomeDirectory


** {Set Permission}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=SETPERMISSION
                              [&permission=<OCTAL>]"
+---------------------------------

  The client receives a response with zero content length:

+---------------------------------
HTTP/1.1 200 OK
Content-Length: 0
+---------------------------------

  []

  See also:
  {{{Permission}<<<permission>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.setPermission


** {Set Owner}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=SETOWNER
                              [&owner=<USER>][&group=<GROUP>]"
+---------------------------------

  The client receives a response with zero content length:

+---------------------------------
HTTP/1.1 200 OK
Content-Length: 0
+---------------------------------

  []

  See also:
  {{{Owner}<<<owner>>>}},
  {{{Group}<<<group>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.setOwner


** {Set Replication Factor}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=SETREPLICATION
                              [&replication=<SHORT>]"
+---------------------------------

  The client receives a response with a {{{Boolean JSON Schema}<<<boolean>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{"boolean": true}
+---------------------------------

  []

  See also:
  {{{Replication}<<<replication>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.setReplication


** {Set Access or Modification Time}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/webhdfs/v1/<PATH>?op=SETTIMES
                              [&modificationtime=<TIME>][&accesstime=<TIME>]"
+---------------------------------

  The client receives a response with zero content length:

+---------------------------------
HTTP/1.1 200 OK
Content-Length: 0
+---------------------------------

  []

  See also:
  {{{Modification Time}<<<modificationtime>>>}},
  {{{Access Time}<<<accesstime>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.setTimes


* {Delegation Token Operations}

** {Get Delegation Token}

  * Submit a HTTP GET request.

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/?op=GETDELEGATIONTOKEN&renewer=<USER>"
+---------------------------------

  The client receives a response with a {{{Token JSON Schema}<<<Token>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{
  "Token":
  {
    "urlString": "JQAIaG9y..."
  }
}
+---------------------------------

  []

  See also:
  {{{Renewer}<<<renewer>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getDelegationToken


** {Get Delegation Tokens}

  * Submit a HTTP GET request.

+---------------------------------
curl -i "http://<HOST>:<PORT>/webhdfs/v1/?op=GETDELEGATIONTOKENS&renewer=<USER>"
+---------------------------------

  The client receives a response with a {{{Tokens JSON Schema}<<<Tokens>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{
  "Tokens":
  {
    "Token":
    [
      {
        "urlString":"KAAKSm9i ..."
      }
    ]
  }
}
+---------------------------------

  []

  See also:
  {{{Renewer}<<<renewer>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.getDelegationTokens


** {Renew Delegation Token}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/webhdfs/v1/?op=RENEWDELEGATIONTOKEN&token=<TOKEN>"
+---------------------------------

  The client receives a response with a {{{Long JSON Schema}<<<long>>> JSON object}}:

+---------------------------------
HTTP/1.1 200 OK
Content-Type: application/json
Transfer-Encoding: chunked

{"long": 1320962673997}           //the new expiration time
+---------------------------------

  []

  See also:
  {{{Token}<<<token>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.renewDelegationToken


** {Cancel Delegation Token}

  * Submit a HTTP PUT request.

+---------------------------------
curl -i -X PUT "http://<HOST>:<PORT>/webhdfs/v1/?op=CANCELDELEGATIONTOKEN&token=<TOKEN>"
+---------------------------------

  The client receives a response with zero content length:

+---------------------------------
HTTP/1.1 200 OK
Content-Length: 0
+---------------------------------

  []

  See also:
  {{{Token}<<<token>>>}},
   {{{../../api/org/apache/hadoop/fs/FileSystem.html}FileSystem}}.cancelDelegationToken


* {Error Responses}

  When an operation fails, the server may throw an exception.
  The JSON schema of error responses is defined in {{<<<RemoteException>>> JSON schema}}.
  The table below shows the mapping from exceptions to HTTP response codes.

** {HTTP Response Codes}

*-------------------------------------+---------------------------------+
|| Exceptions                         || HTTP Response Codes            |
*-------------------------------------+---------------------------------+
| <<<IllegalArgumentException     >>> | <<<400 Bad Request          >>> |
*-------------------------------------+---------------------------------+
| <<<UnsupportedOperationException>>> | <<<400 Bad Request          >>> |
*-------------------------------------+---------------------------------+
| <<<SecurityException            >>> | <<<401 Unauthorized         >>> |
*-------------------------------------+---------------------------------+
| <<<IOException                  >>> | <<<403 Forbidden            >>> |
*-------------------------------------+---------------------------------+
| <<<FileNotFoundException        >>> | <<<404 Not Found            >>> |
*-------------------------------------+---------------------------------+
| <<<RumtimeException             >>> | <<<500 Internal Server Error>>> |
*-------------------------------------+---------------------------------+

  Below are examples of exception responses.

*** {Illegal Argument Exception}

+---------------------------------
HTTP/1.1 400 Bad Request
Content-Type: application/json
Transfer-Encoding: chunked

{
  "RemoteException":
  {
    "exception"    : "IllegalArgumentException",
    "javaClassName": "java.lang.IllegalArgumentException",
    "message"      : "Invalid value for webhdfs parameter \"permission\": ..."
  }
}
+---------------------------------


*** {Security Exception}

+---------------------------------
HTTP/1.1 401 Unauthorized
Content-Type: application/json
Transfer-Encoding: chunked

{
  "RemoteException":
  {
    "exception"    : "SecurityException",
    "javaClassName": "java.lang.SecurityException",
    "message"      : "Failed to obtain user group information: ..."
  }
}
+---------------------------------


*** {Access Control Exception}

+---------------------------------
HTTP/1.1 403 Forbidden
Content-Type: application/json
Transfer-Encoding: chunked

{
  "RemoteException":
  {
    "exception"    : "AccessControlException",
    "javaClassName": "org.apache.hadoop.security.AccessControlException",
    "message"      : "Permission denied: ..."
  }
}
+---------------------------------


*** {File Not Found Exception}

+---------------------------------
HTTP/1.1 404 Not Found
Content-Type: application/json
Transfer-Encoding: chunked

{
  "RemoteException":
  {
    "exception"    : "FileNotFoundException",
    "javaClassName": "java.io.FileNotFoundException",
    "message"      : "File does not exist: /foo/a.patch"
  }
}
+---------------------------------


* {JSON Schemas}

  All operations, except for {{{Open and Read a File}<<<OPEN>>>}},
  either return a zero-length response or a JSON response. 
  For {{{Open and Read a File}<<<OPEN>>>}}, the response is an octet-stream.
  The JSON schemas are shown below.
  See {{{http://tools.ietf.org/id/draft-zyp-json-schema-03.html}draft-zyp-json-schema-03}}
  for the syntax definitions of the JSON schemas.

  <<Note>> that the default value of
  {{{http://tools.ietf.org/id/draft-zyp-json-schema-03.html#additionalProperties}<<<additionalProperties>>>}}
  is an empty schema which allows any value for additional properties.
  Therefore, all WebHDFS JSON responses allow any additional property.
  However, if additional properties are included in the responses, they are
  considered as optional properties in order to maintain compatibility.

** {Boolean JSON Schema}

+---------------------------------
{
  "name"      : "boolean",
  "properties":
  {
    "boolean":
    {
      "description": "A boolean value",
      "type"       : "boolean",
      "required"   : true
    }
  }
}
+---------------------------------

  See also:
  {{{Make a Directory}<<<MKDIRS>>>}},
  {{{Rename a File/Directory}<<<RENAME>>>}},
  {{{Delete a File/Directory}<<<DELETE>>>}},
  {{{Set Replication Factor}<<<SETREPLICATION>>>}}


** {ContentSummary JSON Schema}

+---------------------------------
{
  "name"      : "ContentSummary",
  "properties":
  {
    "ContentSummary":
    {
      "type"      : "object",
      "properties":
      {
        "directoryCount":
        {
          "description": "The number of directories.",
          "type"       : "integer",
          "required"   : true
        },
        "fileCount":
        {
          "description": "The number of files.",
          "type"       : "integer",
          "required"   : true
        },
        "length":
        {
          "description": "The number of bytes used by the content.",
          "type"       : "integer",
          "required"   : true
        },
        "quota":
        {
          "description": "The namespace quota of this directory.",
          "type"       : "integer",
          "required"   : true
        },
        "spaceConsumed":
        {
          "description": "The disk space consumed by the content.",
          "type"       : "integer",
          "required"   : true
        },
        "spaceQuota":
        {
          "description": "The disk space quota.",
          "type"       : "integer",
          "required"   : true
        }
      }
    }
  }
}
+---------------------------------

  See also:
  {{{Get Content Summary of a Directory}<<<GETCONTENTSUMMARY>>>}}


** {FileChecksum JSON Schema}

+---------------------------------
{
  "name"      : "FileChecksum",
  "properties":
  {
    "FileChecksum":
    {
      "type"      : "object",
      "properties":
      {
        "algorithm":
        {
          "description": "The name of the checksum algorithm.",
          "type"       : "string",
          "required"   : true
        },
        "bytes":
        {
          "description": "The byte sequence of the checksum in hexadecimal.",
          "type"       : "string",
          "required"   : true
        },
        "length":
        {
          "description": "The length of the bytes (not the length of the string).",
          "type"       : "integer",
          "required"   : true
        }
      }
    }
  }
}
+---------------------------------

  See also:
  {{{Get File Checksum}<<<GETFILECHECKSUM>>>}}


** {FileStatus JSON Schema}

+---------------------------------
{
  "name"      : "FileStatus",
  "properties":
  {
    "FileStatus": fileStatusProperties      //See FileStatus Properties
  }
}
+---------------------------------

  See also:
  {{{FileStatus Properties}<<<FileStatus>>> Properties}},
  {{{Status of a File/Directory}<<<GETFILESTATUS>>>}},
  {{{../../api/org/apache/hadoop/fs/FileStatus}FileStatus}}


*** {FileStatus Properties}

  JavaScript syntax is used to define <<<fileStatusProperties>>>
  so that it can be referred in both <<<FileStatus>>> and <<<FileStatuses>>> JSON schemas.

+---------------------------------
var fileStatusProperties =
{
  "type"      : "object",
  "properties":
  {
    "accessTime":
    {
      "description": "The access time.",
      "type"       : "integer",
      "required"   : true
    },
    "blockSize":
    {
      "description": "The block size of a file.",
      "type"       : "integer",
      "required"   : true
    },
    "group":
    {
      "description": "The group owner.",
      "type"       : "string",
      "required"   : true
    },
    "length":
    {
      "description": "The number of bytes in a file.",
      "type"       : "integer",
      "required"   : true
    },
    "modificationTime":
    {
      "description": "The modification time.",
      "type"       : "integer",
      "required"   : true
    },
    "owner":
    {
      "description": "The user who is the owner.",
      "type"       : "string",
      "required"   : true
    },
    "pathSuffix":
    {
      "description": "The path suffix.",
      "type"       : "string",
      "required"   : true
    },
    "permission":
    {
      "description": "The permission represented as a octal string.",
      "type"       : "string",
      "required"   : true
    },
    "replication":
    {
      "description": "The number of replication of a file.",
      "type"       : "integer",
      "required"   : true
    },
   "symlink":                                         //an optional property
    {
      "description": "The link target of a symlink.",
      "type"       : "string"
    },
   "type":
    {
      "description": "The type of the path object.",
      "enum"       : ["FILE", "DIRECTORY", "SYMLINK"],
      "required"   : true
    }
  }
};
+---------------------------------


** {FileStatuses JSON Schema}

  A <<<FileStatuses>>> JSON object represents an array of <<<FileStatus>>> JSON objects.

+---------------------------------
{
  "name"      : "FileStatuses",
  "properties":
  {
    "FileStatuses":
    {
      "type"      : "object",
      "properties":
      {
        "FileStatus":
        {
          "description": "An array of FileStatus",
          "type"       : "array",
          "items"      : fileStatusProperties      //See FileStatus Properties
        }
      }
    }
  }
}
+---------------------------------

  See also:
  {{{FileStatus Properties}<<<FileStatus>>> Properties}},
  {{{List a Directory}<<<LISTSTATUS>>>}},
  {{{../../api/org/apache/hadoop/fs/FileStatus}FileStatus}}


** {Long JSON Schema}

+---------------------------------
{
  "name"      : "long",
  "properties":
  {
    "long":
    {
      "description": "A long integer value",
      "type"       : "integer",
      "required"   : true
    }
  }
}
+---------------------------------

  See also:
  {{{Renew Delegation Token}<<<RENEWDELEGATIONTOKEN>>>}},


** {Path JSON Schema}

+---------------------------------
{
  "name"      : "Path",
  "properties":
  {
    "Path":
    {
      "description": "The string representation a Path.",
      "type"       : "string",
      "required"   : true
    }
  }
}
+---------------------------------

  See also:
  {{{Get Home Directory}<<<GETHOMEDIRECTORY>>>}},
  {{{../../api/org/apache/hadoop/fs/Path}Path}}


** {RemoteException JSON Schema}

+---------------------------------
{
  "name"      : "RemoteException",
  "properties":
  {
    "RemoteException":
    {
      "type"      : "object",
      "properties":
      {
        "exception":
        {
          "description": "Name of the exception",
          "type"       : "string",
          "required"   : true
        },
        "message":
        {
          "description": "Exception message",
          "type"       : "string",
          "required"   : true
        },
        "javaClassName":                                     //an optional property
        {
          "description": "Java class name of the exception",
          "type"       : "string",
        }
      }
    }
  }
}
+---------------------------------

  See also:
  {{Error Responses}}


** {Token JSON Schema}

+---------------------------------
{
  "name"      : "Token",
  "properties":
  {
    "Token": tokenProperties      //See Token Properties
  }
}
+---------------------------------

  See also:
  {{{Token Properties}<<<Token>>> Properties}},
  {{{Get Delegation Token}<<<GETDELEGATIONTOKEN>>>}},
  the note in {{Delegation}}.

*** {Token Properties}

  JavaScript syntax is used to define <<<tokenProperties>>>
  so that it can be referred in both <<<Token>>> and <<<Tokens>>> JSON schemas.

+---------------------------------
var tokenProperties =
{
  "type"      : "object",
  "properties":
  {
    "urlString":
    {
      "description": "A delegation token encoded as a URL safe string.",
      "type"       : "string",
      "required"   : true
    }
  }
}
+---------------------------------

** {Tokens JSON Schema}

  A <<<Tokens>>> JSON object represents an array of <<<Token>>> JSON objects.

+---------------------------------
{
  "name"      : "Tokens",
  "properties":
  {
    "Tokens":
    {
      "type"      : "object",
      "properties":
      {
        "Token":
        {
          "description": "An array of Token",
          "type"       : "array",
          "items"      : "Token": tokenProperties      //See Token Properties
        }
      }
    }
  }
}
+---------------------------------

  See also:
  {{{Token Properties}<<<Token>>> Properties}},
  {{{Get Delegation Tokens}<<<GETDELEGATIONTOKENS>>>}},
  the note in {{Delegation}}.


* {HTTP Query Parameter Dictionary}

** {Access Time}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<accesstime>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The access time of a file/directory. |
*----------------+-------------------------------------------------------------------+
|| Type          | long |
*----------------+-------------------------------------------------------------------+
|| Default Value | -1 (means keeping it unchanged) |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | -1 or a timestamp |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any integer. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Set Access or Modification Time}<<<SETTIMES>>>}}


** {Block Size}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<blocksize>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The block size of a file. |
*----------------+-------------------------------------------------------------------+
|| Type          | long |
*----------------+-------------------------------------------------------------------+
|| Default Value | Specified in the configuration. |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | \> 0 |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any integer. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Create and Write to a File}<<<CREATE>>>}}


** {Buffer Size}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<buffersize>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The size of the buffer used in transferring data. |
*----------------+-------------------------------------------------------------------+
|| Type          | int |
*----------------+-------------------------------------------------------------------+
|| Default Value | Specified in the configuration. |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | \> 0 |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any integer. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Create and Write to a File}<<<CREATE>>>}},
  {{{Append to a File}<<<APPEND>>>}},
  {{{Open and Read a File}<<<OPEN>>>}}


** {Create Parent}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<createparent>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | If the parent directories do not exist, should they be created?   |
*----------------+-------------------------------------------------------------------+
|| Type          | boolean |
*----------------+-------------------------------------------------------------------+
|| Default Value | false |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | true | false |
*----------------+-------------------------------------------------------------------+
|| Syntax        | true | false |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Create a Symbolic Link}<<<CREATESYMLINK>>>}}


** {Delegation}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<delegation>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The delegation token used for authentication. |
*----------------+-------------------------------------------------------------------+
|| Type          | String |
*----------------+-------------------------------------------------------------------+
|| Default Value | \<empty\> |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | An encoded token. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | See the note below. |
*----------------+-------------------------------------------------------------------+

  <<Note>> that delegation tokens are encoded as a URL safe string;
  see <<<encodeToUrlString()>>>
  and <<<decodeFromUrlString(String)>>>
  in <<<org.apache.hadoop.security.token.Token>>> for the details of the encoding.


  See also:
  {{Authentication}}


** {Destination}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<destination>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The destination path. |
*----------------+-------------------------------------------------------------------+
|| Type          | Path |
*----------------+-------------------------------------------------------------------+
|| Default Value | \<empty\> (an invalid path) |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | An absolute FileSystem path without scheme and authority. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any path. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Create a Symbolic Link}<<<CREATESYMLINK>>>}},
  {{{Rename a File/Directory}<<<RENAME>>>}}


** {Do As}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<doas>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | Allowing a proxy user to do as another user. |
*----------------+-------------------------------------------------------------------+
|| Type          | String |
*----------------+-------------------------------------------------------------------+
|| Default Value | null |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | Any valid username. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any string. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{Proxy Users}}


** {Group}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<group>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The name of a group. |
*----------------+-------------------------------------------------------------------+
|| Type          | String |
*----------------+-------------------------------------------------------------------+
|| Default Value | \<empty\> (means keeping it unchanged) |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | Any valid group name. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any string. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Set Owner}<<<SETOWNER>>>}}


** {Length}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<length>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The number of bytes to be processed. |
*----------------+-------------------------------------------------------------------+
|| Type          | long |
*----------------+-------------------------------------------------------------------+
|| Default Value | null (means the entire file) |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | \>= 0 or null |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any integer. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Open and Read a File}<<<OPEN>>>}}


** {Modification Time}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<modificationtime>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The modification time of a file/directory. |
*----------------+-------------------------------------------------------------------+
|| Type          | long |
*----------------+-------------------------------------------------------------------+
|| Default Value | -1 (means keeping it unchanged) |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | -1 or a timestamp |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any integer. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Set Access or Modification Time}<<<SETTIMES>>>}}


** {Offset}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<offset>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The starting byte position. |
*----------------+-------------------------------------------------------------------+
|| Type          | long |
*----------------+-------------------------------------------------------------------+
|| Default Value | 0 |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | \>= 0 |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any integer. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Open and Read a File}<<<OPEN>>>}}


** {Op}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<op>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The name of the operation to be executed. |
*----------------+-------------------------------------------------------------------+
|| Type          | enum |
*----------------+-------------------------------------------------------------------+
|| Default Value | null (an invalid value) |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | Any valid operation name. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any string. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{Operations}}


** {Overwrite}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<overwrite>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | If a file already exists, should it be overwritten? |
*----------------+-------------------------------------------------------------------+
|| Type          | boolean |
*----------------+-------------------------------------------------------------------+
|| Default Value | false |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | true | false |
*----------------+-------------------------------------------------------------------+
|| Syntax        | true | false |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Create and Write to a File}<<<CREATE>>>}}


** {Owner}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<owner>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The username who is the owner of a file/directory. |
*----------------+-------------------------------------------------------------------+
|| Type          | String |
*----------------+-------------------------------------------------------------------+
|| Default Value | \<empty\> (means keeping it unchanged) |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | Any valid username. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any string. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Set Owner}<<<SETOWNER>>>}}


** {Permission}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<permission>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The permission of a file/directory. |
*----------------+-------------------------------------------------------------------+
|| Type          | Octal |
*----------------+-------------------------------------------------------------------+
|| Default Value | 755 |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | 0 - 1777 |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any radix-8 integer (leading zeros may be omitted.) |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Create and Write to a File}<<<CREATE>>>}},
  {{{Make a Directory}<<<MKDIRS>>>}},
  {{{Set Permission}<<<SETPERMISSION>>>}}


** {Recursive}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<recursive>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | Should the operation act on the content in the subdirectories? |
*----------------+-------------------------------------------------------------------+
|| Type          | boolean |
*----------------+-------------------------------------------------------------------+
|| Default Value | false |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | true | false |
*----------------+-------------------------------------------------------------------+
|| Syntax        | true | false |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Rename a File/Directory}<<<RENAME>>>}}


** {Renewer}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<renewer>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The username of the renewer of a delegation token. |
*----------------+-------------------------------------------------------------------+
|| Type          | String |
*----------------+-------------------------------------------------------------------+
|| Default Value | \<empty\> (means the current user) |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | Any valid username. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any string. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Get Delegation Token}<<<GETDELEGATIONTOKEN>>>}},
  {{{Get Delegation Tokens}<<<GETDELEGATIONTOKENS>>>}}


** {Replication}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<replication>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The number of replications of a file. |
*----------------+-------------------------------------------------------------------+
|| Type          | short |
*----------------+-------------------------------------------------------------------+
|| Default Value | Specified in the configuration. |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | \> 0 |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any integer. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Create and Write to a File}<<<CREATE>>>}},
  {{{Set Replication Factor}<<<SETREPLICATION>>>}}


** {Sources}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<sources>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | A list of source paths. |
*----------------+-------------------------------------------------------------------+
|| Type          | String |
*----------------+-------------------------------------------------------------------+
|| Default Value | \<empty\> |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | A list of comma seperated absolute FileSystem paths without scheme and authority. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any string. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Concat File(s)}<<<CONCAT>>>}}


** {Token}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<token>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The delegation token used for the operation. |
*----------------+-------------------------------------------------------------------+
|| Type          | String |
*----------------+-------------------------------------------------------------------+
|| Default Value | \<empty\> |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | An encoded token. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | See the note in {{Delegation}}. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{{Renew Delegation Token}<<<RENEWDELEGATIONTOKEN>>>}},
  {{{Cancel Delegation Token}<<<CANCELDELEGATIONTOKEN>>>}}


** {Username}

*----------------+-------------------------------------------------------------------+
|| Name          | <<<user.name>>> |
*----------------+-------------------------------------------------------------------+
|| Description   | The authenticated user; see {{Authentication}}. |
*----------------+-------------------------------------------------------------------+
|| Type          | String |
*----------------+-------------------------------------------------------------------+
|| Default Value | null |
*----------------+-------------------------------------------------------------------+
|| Valid Values  | Any valid username. |
*----------------+-------------------------------------------------------------------+
|| Syntax        | Any string. |
*----------------+-------------------------------------------------------------------+

  See also:
  {{Authentication}}