ambari/hmc/archive/ShellScripts/templates/gsInstaller.properties.in

#/*
# * Licensed to the Apache Software Foundation (ASF) under one
# * or more contributor license agreements.  See the NOTICE file
# * distributed with this work for additional information
# * regarding copyright ownership.  The ASF licenses this file
# * to you under the Apache License, Version 2.0 (the
# * "License"); you may not use this file except in compliance
# * with the License.  You may obtain a copy of the License at
# *
# *     http://www.apache.org/licenses/LICENSE-2.0
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# */

#========================================================================================================================#
#======================================== CORE PROPERTIES =====================================#
#========================================================================================================================#

#============================================================#
# GENERAL INSTALLER PROPERTIES
#============================================================#
#ENTER THE DEPLOY USERNAME FOR TAR INSTALLATION
deployuser=@HDPDeployUser@

#ENTER THE FULL PATH TO THE INSTALLATION DIRECTORY FOR HDP (For tar installation only)
installdir=

#ENTER A VALUE FOR 32 BIT javahome AND 64 BIT javahome IF THE NODES HAVE JAVA INSTALLED.
# ELSE IT WILL BE DEFAULTED TO ${installdir}/jdk1.6.0_26 (for tar install) AND /usr (for rpm install) AND JAVA WILL BE INSTALLED FROM ORACLE SITE
java32home=
java64home=

#SUPPORTS ONLY rpm/tar - deb SUPPORT IS WORK IN PROGRESS
package=rpm

#TAKES yes/no VALUE AND ENABLES SECUIRTY IF SET TO yes. Defaults to no
# Oozie should be turned off by setting installoozie=no when security=yes
# Templeton should be turned off by setting installtempleton=no when security=yes
security=no

#============================================================#
# HADOOP CONFIGURATION DETAILS
#============================================================#

#ENTER THE USER THAT HDFS/MAPRED SERVICES SHOULD USE.
hdfsuser=hdfs
mapreduser=mapred

#TO ENABLE HBASE APPEND SET enableappend VALUE TO true
enableappend=true

#TO ENABLE WEBHDFS SET enablewebhdfs TO true
enablewebhdfs=true

#HADOOP DATA, LOG AND PID DIRECTORIES
datanode_dir=@HDPDataNodeDataDir@
namenode_dir=@HDPNameNodeDataDir@
mapred_dir=@HDPMapReduceLocalDir@
log_dir=/var/log/hadoop
pid_dir=/var/run/hadoop

#SCHEDULER TO USE
taskscheduler="org.apache.hadoop.mapred.CapacityTaskScheduler"

#FULL PATH TO KEYTAB LOCATION FOR HDFS USER - [ REQUIRED WHILE security IS SET TO yes ]
hdfs_user_keytab="/homes/${hdfsuser}/${hdfsuser}.headless.keytab"

#FULL PATH TO KINIT EXECUTABLE - [ REQUIRED WHILE security IS SET TO yes ]
kinitpath=/usr/kerberos/bin/kinit

#PATH TO NAMENODE/SNAMENODE/JOBTRACKER/DATANODE/HBASEMASTER/HCATSERVER/TASKTRACKER SERVCE KEYTABS - [ REQUIRED WHILE security IS SET TO yes ]
keytabdir=/etc/security/keytabs

#KERBEROS REALM FOR SECURED CLUSETR - [ REQUIRED WHILE security IS SET TO yes ]
realm=EXAMPLE.COM

#SPECIFY FULL PATH TO SSHKEY WHEN PASSWORDLESS REQUIRES A SSHKEY
sshkey=@HDPSshKey@

#TO ENABLE LZO COMPRESSION
enablelzo=@HDPEnableLzo@

#TO ENABLE snappy COMPRESSION
enablesnappy=yes

#============================================================#
# PIG CONFIGURATION DETAILS
#============================================================#

#ENTER yes TO INSTALL PIG ; no OTHERWISE ; DEFAULTS TO yes
installpig=@HDPInstallPig@

#============================================================#
# HBASE CONFIGURATION DETAILS
# Hbase requires zookeeper, please enter zookeeper settings
# defined below.
#============================================================#

#ENTER yes TO INSTALL HBASE ; no OTHERWISE ; DEFAULTS TO yes
installhbase=@HDPInstallHBase@

#ENTER THE LOG DIR AND PID DIR LOCATION FOR HBASE
hbase_log_dir=/var/log/hbase
hbase_pid_dir=/var/run/hbase

#ENTER THE USER THAT HBASE SERVICES SHOULD USE.
hbaseuser=hbase

#ENTER true/false TO ENABLE/DISABLE SHORTCIRCUIT READS
enableshortcircuit=true

#============================================================#
# ZOOKEEPER CONFIGURATION DETAILS
# Required by Hbase and Templeton
#============================================================#

#ENTER THE LOG DIR AND DATA DIR LOCATION FOR ZOOKEEPER
zk_log_dir=/var/log/zookeeper
zk_pid_dir=/var/run/zookeeper
zk_data_dir=@HDPZookeeperDataDir@
zkuser=zookeeper

#============================================================#
# HCAT CONFIGURATION DETAILS
#============================================================#

#ENTER yes TO INSTALL HCAT ; no OTHERWISE ; DEFAULTS TO yes
installhcat=@HDPInstallHCatalog@

#ENTER THE LOG DIR AND PID DIR LOCATION FOR HCATALOG
hcat_log_dir=/var/log/hcatalog
hcat_pid_dir=/var/run/hcatalog

#MYSQL SERVER HOST NAME
mysqldbhost=@HDPHCatalogMySqlDbHost@

#MYSQL DATABASE NAME, USERNAME AND PASSWORD
databasename=@HDPHCatalogMySqlDbName@
mysqldbuser=@HDPHCatalogMySqlDbUser@
mysqldbpasswd=@HDPHCatalogMySqlDbPassword@

#ENTER THE USER THAT HCAT SERVICE SHOULD USE.
hcatuser=hcat

#ENTER THE USER WHO SHOULD EXECUTE THE SMOKE TEST
smoke_test_user="${hdfsuser}"
#FULL PATH TO KEYTAB LOCATION FOR SMOKE TEST USER - [ REQUIRED WHILE security IS SET TO yes ]
smoke_test_user_keytab="/homes/${smoke_test_user}/${smoke_test_user}.headless.keytab"


#============================================================#
# TEMPLETON CONFIGURATION DETAILS
# Requires Hcatalog and Zookeeper installed, please fill
# appropriate settings.
#============================================================#
#ENTER yes TO INSTALL TEMPLETON ; no OTHERWISE ; DEFAULTS TO yes
installtempleton=@HDPInstallTempleton@

#ENTER THE USER THAT TEMPLETON SERVICE SHOULD USE.
templetonuser=mapred

#ENTER THE LOG DIR AND PID DIR LOCATION FOR TEMPLETON
templeton_log_dir=/var/log/templeton
templeton_pid_dir=/var/run/templeton
#============================================================#
# SQOOP CONFIGURATION DETAILS
#============================================================#

#ENTER yes TO INSTALL SQOOP ; no OTHERWISE ; DEFAULTS TO yes
installsqoop=@HDPInstallSqoop@

#============================================================#
# OOZIE CONFIGURATION DETAILS
#============================================================#

#ENTER yes TO INSTALL OOZIE ; no OTHERWISE ; DEFAULTS TO yes
installoozie=@HDPInstallOozie@

#ENTER THE LOG DIR, PID DIR and DB DIR LOCATION FOR OOZIE 
oozie_log_dir=/var/log/oozie
oozie_pid_dir=/var/run/oozie
oozie_db_dir=@HDPOozieDbDir@

#ENTER THE USER THAT OOZIE SERVICE SHOULD USE.
oozieuser=oozie


#========================================================================================================================#
#======================================== UNIVR PROPERTIES =================================#
#========================================================================================================================#

#============================================================#
# MONITORING PROPERTIES FOR GANGLIA AND NAGIOS
#============================================================#
#TO ENABLE NAGIOS AND GANGLIA INTEGRATION WITH HADOOP
enablemon=yes

outputlogfile=@HDPGSInstallLogFile@

forceclean=true

statusdumpfile=@HDPGSInstallStatusDumpFile@